Conversation Between shawn18 and ddunerider
Showing Visitor Messages 1 to 9 of 9
-
yep definately has a deeper growl to it and my butt dyno tells me its a bit quicker as well i am hoping to put a Corsa Cat back system on it in the next few month's
-
Very nice!! did you notice a big differance with the intake?
-
I just posted the only pic i have so far its at the shop having stripes put on today!!! I put a Gen5 Camaro Racing Air intake on it yesterday i will post pics of as well thanks for the help with the flags.
-
I wana see V-Flags on a white car!!
-
thanks yeah my wife has the 1LT its pretty neat having 2 we didnt order hers just stumbled on it after i had ordered mine so we felt pretty lucky to find one then {june 29th} on the lot like that
-
Nice Pics! You have Two Camaros!!! Pretty Awesome.
-
Ok thanks man i was thinking i would need to cut the prongs off but didnt want to touch them til i talked to you thanks again for the help i will let you know how it goes,shawn
-
And then stick it on ....Good luck .
I bought all the material at PeP-Boys any questions let me know!
-
Allright you got them.They have two prongs on the back of the emblems you need to cut these off then grind them down.But not to get the metal hot when grinding or it will melt the paint on your new emblems.Next get a tube of bondo plastic metal and with a puddy knife fill the back nice and flat so that the bondo fills the back let sit overnight.Next day sand the back nice and smooth so that you cans see the silver out line on the back of the emblem takes some time.The get 3M Molding two sided tape also for emblems.Clean you emblems with rubbing alcohol then apply the tape to the emblem and cut off the exess tape with a exicto.Now for spaceing i used the 1" blue masking tape for painting and placed a full peice of tape right under the Camaro emblem so that I had a nice strieght line.Cleaned the area on the car with Rubbing Alcohol peal the backing of the nicely trimed emblem and stick in on the edge of the tape is your streight edge.