That definitely helped, Im going to try to get them done by wednesday and ill let you know how they turn out. Im getting them painted artic white which should match my stripes when i get them. Yours turned out really nice and ill be sure to get some small screws for it.
Let's see, first off when you take the plastic rivets out (I used a grinder) make sure when you replace them with small screws that they're VERY short otherwise it'll go through to the other side and you can see the marks from the outside. It's really not too complicated. Also to paint the dash trim your going to have to sand them down a bit because the cloth is stapled to the trim and you can see the indentations on the other side. Hope this helps! If you've got any other questions feel free to ask.