atlang3lo

This is a pic of the led ring lighted at night. The inside part is to bright to get a picture of with it on.

I'm not claer what your asking? If you bought the same set I did they are all in one. There are 2 round housings in the box. In each housing is a led ring that lights up around the outside of each unit. The middle part is the clear beam driving\ fog light.

okay so imma have to order some fog lights as well then huh? Hey man I looked online and at your picture of your rims do your rims look small small on your car? I saw your pics but your angles u cant really tell cant u take one pic for me close up cuz im about to order the Tweaker's.

Its one unit with the halos on the outside and the driving lights in the middle. Mine came with a switch, the wiring, and mounting brackets

The shop didn't mention it being all that difficult. The plastic covers that are already there are actually the factory mounts for the other models with the lights. The way I understood it they just cut the "cap" off and the rest was ready to go.

All of it came from ebay. The lights are HELLA OPTILUX 2500 ANGEL EYES FOG/DRIVING LIGHTS LAMPS and run around 60$. If your patient you can sneak in on an auction for 40 sometimes. The covers are GTS covers and come in a kit or can be bought seperate. I also tinted the backuups and side markers with a pre cut tinted film I pick up on ebay. Just search 2010 camaro and try to get away from there without spending some dough!

I had them installed at a local body shop. They had to remove the inner fender wells and do some cutting of the fog light surrounds to make it look stock. Cost me about 160 for the lights and install, so it was a deal.