Allright you got them.They have two prongs on the back of the emblems you need to cut these off then grind them down.But not to get the metal hot when grinding or it will melt the paint on your new emblems.Next get a tube of bondo plastic metal and with a puddy knife fill the back nice and flat so that the bondo fills the back let sit overnight.Next day sand the back nice and smooth so that you cans see the silver out line on the back of the emblem takes some time.The get 3M Molding two sided tape also for emblems.Clean you emblems with rubbing alcohol then apply the tape to the emblem and cut off the exess tape with a exicto.Now for spaceing i used the 1" blue masking tape for painting and placed a full peice of tape right under the Camaro emblem so that I had a nice strieght line.Cleaned the area on the car with Rubbing Alcohol peal the backing of the nicely trimed emblem and stick in on the edge of the tape is your streight edge.
Polly somethin to do with stock vs pre-sold. I sat @ 1100 since 4/21. I do think that things are beginning to move more quickly now. They are closer to getting caught up, although Oshawa closing 7/6-11 isn't going to help! Hang in there!