Nice job! I’m looking at a similar stripe pattern but black on white. Brembo cross drilled rotors to reduce heat from HP increase are the way to go. I couldn’t tell in the pictures but if you haven’t yet you should look into them. Looking forward to seeing what else you have planned!
|
I have been pondering doing white stripes myself, it looks pretty sweet, i am considering white powder coating the wheels with white stripes. nice ride and congrats on COTW
|
Quote:
Quote:
Quote:
|
I didnt see that LED strip on the MALE slot before thats really creative I like it. And it looks like we have a pair of ying-yang black and white camaro's here
|
Quote:
|
1 Attachment(s)
Quote:
|
Quote:
http://www.camaro5.com/forums/member.php?u=1 |
Quote:
Quote:
So, Who is copying who? :paddle: :mad0260: :sm0: |
Some really fine pics of your car. I understand you got a trophy at the Camaro 5 fest. :chevy::chevy:
|
Quote:
Like I said before "I Love the stripes on your car" . ('Luttinger' Cars is also awesome...:thumbsup:) |
I really like your Camaro, she is a real beauty.
Please tell me about the change out of the rear end gearing? What was the cost and what is the difference in performance over the standard gearing? Was the 3.70 the right gearing, and is it hard to keep the car under power? Are replacement tires bankrupting you? LOL! |
Quote:
I can't remember the exact cost. PM Andy at ADM Performance to get the price.. The 3.70 gears are perfect for a daily driver.. I beat another Camaro with 25 more horsepower due to the gears.. It is pretty easy to keep the tires on the ground as long as you don't pop the clutch, if you slip it coming off the line, it is just right :thumbup:.. The stock clutch stinks in my Camaro, I can't wait to get the Lingenfelter ZR-1 Twin Disc Clutch in mine.. The swap out was about 45 minutes at ADM Performance. They have the entire pumpkin there and waiting and did a quick swap while I waited.. Those guys at ADM Performance are AWESOME !! |
Wow:confused0068: a great locking :respekt::respekt::respekt:car
|
Nice. I like the color combo set up. The tires look off-roady to me
|
NICE!
|
Quote:
|
Congrats on COTW!!
|
Quote:
Quote:
Quote:
Quote:
Quote:
|
Looking good brother... :thumbsup: When are we going to the track again? :thumbup:
|
An amazing camaro, inspiration at its best!
|
1 Attachment(s)
BADD AASS!
Your wheels are almost like mine...except BLACK! I envy the supercharger...on my list for sure! NICE JOB. |
Quote:
Quote:
Quote:
|
3 Attachment(s)
Here are some pictures of my throwout bearing that went out in my car.. I replaced with a stock clutch (taken out of someone elses car after 50 miles or so) until I can replace with a Lingenfelter ZR-1 clutch kit...
|
2 Attachment(s)
I went to the Texas Camaro Nationals yesterday in Sealy, TX at LoneStar Motorsports Park presented by the H-Town Camaro Club and took 1st place in my group.. Here is my best time slip and trophy that I won !!
|
CONGRATS, great job....
|
1 Attachment(s)
For those of you that are/were wondering whether these Camaro's can take a little abuse.. Here is proof.. I have had my car for 14 months and just turned over 50,000 miles and have been running a blower/cam setup with 603 RWHP for 30,000 of those miles (Hard Miles).. I have been to both of the MTI Racing Funfests as well as 1st Annual Camaro5Fest, plus many runs on the 1/4 and 1/8 mile dragstrips locally.. I LOVE THIS CAR !!
Here was my odometer reading last week !! |
Holy crap that's a lot of miles, I thought my 15,000 was alot..LOL...
Great car and a great performance shop |
Congrats Keith on your Trophy and Win.:bow:
|
By the way 21 do you have a dyno sheet that we can see? also how much boost are you running?
Still love the car keep up the great work :thumbup: |
Quote:
|
Quote:
Thanks for the compliment !! |
I will be at the office this week. Wanna look at your "knight rider" install.
Roy |
1 Attachment(s)
I will be dropping "Rubye" off this week at ADM Performance for a LPE ZR-1 Twin Disc Clutch and an 8-Rib Pulley system with oversized balancer !! I can't wait. :happyanim:
Here is a picture of the Innovators West F-Body 8-Rib Pulley System !! You can purchase these from Andy @ ADM Performance !! |
ADM Performance installed the Clutch and the 8-Rib Pulley System. Andy re-tuned and dyno'd the car again. It was making 615RWHP. The 8-Rib system came with the 3.6 blower pulley and was only making about 8lbs of boost. Andy ordered the 3.4 pulley and I picked it up and installed in right before the Christmas break. I still need to go back to ADM Performance and have Andy Re-tune and dyno the car again to see what the new numbers are...
I will keep everyone posted on what kind of Boost and HP gains the smaller pulley made.. |
1 Attachment(s)
I had my car re-tuned and dyno'd today by Andy at ADM Performance after I installed the 3.4 blower pulley today and it made 625RWHP with 595 RWTQ with max boost was about 9lbs on 93 Octane... :happyanim:
This thing runs AWESOME !! I can't wait to get it back on the track in April at C5Fest !! |
Great numbers, especially if the butt dyno is liking it....i too am looking foreward to April...
|
Quote:
|
1 Attachment(s)
After having my latest mod's done, I took "Rubye" to the Drag Strip today and ran my personal best. Thanks to Andy @ ADM Performance !! He ROCKS !!
LS3/M6, TVS2300, Cam, Headers, ADM Street CAI, 8-Rib Pulley System, 3.4 Blower Pulley, Mickey Thompson's DR's. 625RWHP & 595RWTQ ET - 11.267 @ 126.46MPH :happyanim: |
Great numbers...I'm pissed you have 1 more horsepower then me...LOL
|
Quote:
|
All times are GMT -5. The time now is 04:01 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.