Mike is he still active on the forums do you know?

Replacing the current rear suspension with a straight axle. like the COPO.

There is no need in a straight axle.

Yes he is

Here ya go bud. http://www.camaro5.com/forums/showthread.php?t=319255

His last active post was June this year. I know he is not on hear much anymore.

I don't know if you'd replace the doors or not, but after seeing that drunken driver thread I would personally leave the stock doors

I want to see somebody just try this

Think there is any weight to be saved by swapping out the stock LS3 midpipe for an aftermarket one?

Did anybody try to bore out the cylinders? for a larger displacment.

Does anyone make larger pistons for this bored out oepning? You will need pistons made in order to bore these larger.

There was talk at one time to make a stroker kit which would provide more HP that just boring. However, this will be expensive and someone will need to create the crank too.

JE could do it, only six pistons. not a stroker. maybe running a elderbrock manifold with a 1050 carb. oh wait old school. just dreaming

Good luck kjkjr27 :thumbsup:

Hope you can make it !

Try this mod:

http://www.youtube.com/watch?v=SBAzWE2CtBY