OEM Halo Upgrade to color shifting Lights
 

I like the OEM Halo rings more then any thing i have seen so far, So i went and had some RGB LED's made they are 10 watt's of power and get mounted in the RS headlight.

Here is a bad video of it in the head light.



So it will come with a RF remote that works from more then 20Ft away (unless you use the same batteries for 2 years) Here is a list of what the remote will do.

Lets see if we can do 20 sets, this will come to you with 1 remote, 2 LED's, wires to go in to the car to go under the console.

Cost is $195, but if we sale 10 sets i will price it at $180 and if we do 20 sets we can do it for $160, if its over 50 sets i will add free shipping.

If you want in on this you will need to pay and it will ship out at the end of the month i am working on rings for your fog/DRL's that will work with this.


G.B.

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:

Great job with this Ofer, I'm sure it will sell like hot cakes.

these are 5050 3-Chip RGB LED's you are using?

No there not it is a single hi power LED.

nice>>>>are you working bare footed :yikes::laugh::laugh:

lupe

In order to be a color changing led you have to have a red, blue and green diode; hence a 3 chip LED

But a 5050 is a small chip, http://www.superbrightleds.com/timth...30&zc=1&trim=1

And this is what comes in the RS headlight.
http://www.superbrightleds.com/image...xpe-xpgwht.jpg

G B # 1

1. Badazss
2.
3.

wish i didnt have my aac ones

Ofer, please describe the installation procedure.

Much the same as any upgrade to the headlights, You need to open them then simply replace the OEM LED with this LED its the same size and is held in the same way, The old connecter from the headlight for the LED is not connected back, then drill a small hole for the new wire, seal the hole with RTV and run you wire back to the center console.

G. B. #1
1. Badazss
2. Nolestradamus

This looks VERY cool. I wish I had RS headlights now, but I love my non-RS with 8000k HID's. Maybe you'll come up with something for us non-RS guys?

Thanks.

Working on it.