Suspension ???
 

I have a 2010 SS I will be converting to the FE4+ rear suspension I got 1LE sways already and running a square set up with 275s. How would this set up work/function with ZL1 wheels and tire size. I understand the 1LE is setup for a squared setup not a staggered.

It'll work out great. The tires will be a bit stretched; especially in the rear though. I'd consider going 285 all the way around.

Best regards,

Tyler
888-308-6007

Meant how will the ZL1 staggered wheel and Tire package work with 1LE sways since the 1LE is set up for a square setup????

It should work just fine. You'll have some understeer but unless you track the car it wont be a issue.

Sorry, I mis-read your post. The 1LE and ZL1 have the same staggered wheel setup. The difference is the tire sizes. You will have some under-steer running a larger rear with the 1LE sways, but you could always go with a stiffer aftermarket rear bar.

Best regards,

Tyler
888-38-6007

Ok cool wanted to make sure there would be no adverse effect an I'm trying to stay somewhat stock only real thing I wanna do is replace bushings and RLCAs