Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons (http://www.camaro5.com/forums/forumdisplay.php?f=11)
-   -   Fastlane Stage 1 Camaro Package (intake, header, exhaust) breaks 400rwhp (http://www.camaro5.com/forums/showthread.php?t=22348)

mwilkes 05-11-2009 07:30 PM

To answer other questions...
stripes are orange...
it's 2ss/rs
it's a six speed

jakemaxx 05-11-2009 07:31 PM

very nice how much??

Camarofan123 05-11-2009 07:34 PM

I have no idea but I bet over 3,000.

Probably 1400 for the longtubes/mid-pipe, around 1200 for catback mufflers/over axle pipes, and 600ish for intake tune. This doesn't include labor/tuning costs.

Hi mwilkes, my dad has tuned his mustang gt/cs at your shop before.

TAG UR IT 05-11-2009 07:38 PM

yep...now 45 sounded abput right.

vert cool !

Milk 1027 05-11-2009 07:40 PM

Quote:

Originally Posted by mwilkes (Post 477865)
Hi, I made that video of the Fastlane Camaro... a couple of things to note...

1: I mesed up the base Dyno and the intial numbers were not as low as the ones i posted. The car actually made 355 rwhp from the factory.

2: It did make hit the 400+ rwhp on the dyno, but the gains are not actually "+72 RWHP and +66 RWTQ" more like +45 RWHP and +40 RWTQ

Sorry for messing that up...

That's still a pretty good gain. Thanks for the info.

Camarofan123 05-11-2009 07:42 PM

Yeah that is a pretty good gain, I bet that car will run 12.5-12.6 after adding a set of gears and DR's.

dankss 05-11-2009 07:58 PM

that car must of not had very many miles on it...

i mean 328rwhp baseline?? dyno that again after the first oil change.. i put money that it makes more hp

Camarofan123 05-11-2009 07:59 PM

You must have missed that the baseline was actually 355rwhp. The 328rwhp number was a accidental number put in the video.

Cmurf_SS 05-11-2009 08:12 PM

New Dyno Pull from Fastlane
 
Hope this isnt a repost guys..



:thumbsup:

mwilkes 05-11-2009 08:18 PM

i don't know what the price is since i only do the videos are but stainless long tubes and 3" exhaust are not cheap and they are custom, because nobody makes a set of them yet. Kooks claims too, but we found out the hard way they don't fit...

Camarofan123 << Sweet! hope he still loves it!

Crowley 05-11-2009 08:19 PM

Quote:

Originally Posted by bigralph (Post 477461)
http://videos.streetfire.net/video/F...o-1_681551.htm

Fastlane Incorporated has just posted that video of its Camaro breaking the 400rwhp barrier. The modifications include:

Fastlane's Pipeline True Cold Air Intake
Custom header's
Full 3" exhaust.

With these mods alone, Fastlane was able to dyno their Camaro at 400rwhp and 415ft-lb torque, for a gain for +72 RWHP and +66 RWTQ

So that is an automatic? Just wanted to make sure as the initial dyno rwhp is very low .. if it is an auto that would explain .. I saw a post with something about 355rwhp .. so that wouldn't be a 72rwhp gain then right?

Crowley

mwilkes 05-11-2009 08:21 PM

If anyone cares, i shot a Desktop wallpaper of this Camaro and you can download it here:

http://farm4.static.flickr.com/3582/...62bc18dd_o.jpg

mwilkes 05-11-2009 08:22 PM

Quote:

Originally Posted by Crowley (Post 478047)
So that is an automatic? Just wanted to make sure as the initial dyno rwhp is very low .. if it is an auto that would explain .. I saw a post with something about 355rwhp .. so that wouldn't be a 72rwhp gain then right?

Crowley

no, it's a six speed and i messed up the baseline dyno... see above... actual gains were about 45 rwhp

Camarofan123 05-11-2009 08:24 PM

Quote:

Originally Posted by mwilkes (Post 478042)
i don't know what the price is since i only do the videos are but stainless long tubes and 3" exhaust are not cheap and they are custom, because nobody makes a set of them yet. Kooks claims too, but we found out the hard way they don't fit...

Camarofan123 << Sweet! hope he still loves it!

Yeah he does, we got 3:73's, Delete Plates, and Pullies installed back in May 2007, but we've had another dynotune since then. It's just over 300rwhp so we are happy. :headbang:

So those Stainless Steel LT's are custom fabricated by Fastlane?


All times are GMT -5. The time now is 01:39 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.