Pumpkin [COTW 12/5/11]
1 Attachment(s)
You have to start some where. How about where it all began. June 29th 2009 when I first layed my eyes on Pumpkin.:wub:
I peeled off the shipping tape and removed the plastic from the drivers seat, bolted on my plate and drove Pumpkin back to the dealer from train yard. :thumbsup: |
Few more pic's delivery day
3 Attachment(s)
Pic's form Preston Chev in Langley BC after I drove Pumpkin back from the train yard.
Down side I had to leave Pumpkin at the dealers overnight for PDI and clean up.:mad0260: |
2 Attachment(s)
June 30th 2009 the Happy Day. Pumpkin lost in the in-famous Area 51 for 59 days. Became one of the final four in Area 51.
Merc and my daughter Alisha took official delivery of Pumpkin at my Dealer Preston Chev Langley BC. |
1 Attachment(s)
Here it is.:happyanim:Big thanks to J Rock.:thanks:( C5 Screen Name "Stampeder"):bow:
:thumbsup: |
The Build Sheet For the most part the mods are not seen, but you will find out about them at Friday Night Street Legals.:thumbsup: The Parts Suppliers ARH BMR MGW HAWK RUSSELL DBA M&H HOOSIER LINGENFELTER NITTO Vararam MSD TCI SJM Elite Engineering The Driveshaft Shop Stillen/ACT JRE ACC VMS Red line Synthetics K&N LPE Strange Engineering Ride Tech Hotchkiss Adams Ghost Armour Clear Cut Creation Wretched Motorsports SPEEDSTER Under The Hood ARH 1 7/8 " Long Tubes w/cats ARH Tail Section and Mufflers Vararam CAI (Super Street Model) Bo White PTB Custom Ported Intake (By Rhino) Lingenfelter CTAP and LNC-003 TCI Roll Control Elite Engineering Catch Can MSD Plug Wires EFI Live (Tuned by Rhino ) Drive Train MGW Shifter DSS 9" 3:70 Optional DSS 9" 456 Spool Diff (Drag Diff) Driveshaft Shop 3.5" Aluminum One Piece DriveShaft Driveshaft Shop 1400 hp Axels ACT Twin Disc Street/Strip 17" Bogarts C/W Hoosier slicks and M&H skinnies Suspension Ride Tech Coilovers Hotchkiss Strut Tower Brace BMR Driveshaft Loop BMR Sub-frame Connectors BMR Tunnel Brace BMR Trailing Arm and Bushings BMR 1" Lowering Springs BMR Sway Bars All The BMR Bushings and Inserts BMR LCA Brace's DBA 2 Piece Front Rotors DBA Rear Rotors Russel SS Braided Brake Lines HAWK HPP Pads Appearance Custom Painted Engine Cover Custom Painted Engine Bay Custon Painted Underside of Hood Tinted Glass Headlight Armour Ghost Armour Adams Products ACC Hex Vents and ACS Hood Liner Heritage Grill ACS Spliter, Z Wing & Wickerbill Audio Apline 500 watt AMP Pioneer 10" Subwoofer Audio Intergrations Sub Enclosure Special Thanks List Ken at Stradle Craft Bill at Dutchman Customs Frank at the Driveshaft Shop Nick at ARH Speedster JS Powersports Tom at ESS J Rock (Stampeder) Sig and graphic's Derek, Jeremy, Chum Lee, Monty, James, Jay and Tony Last but not least Colleen for the endless of hours and days spent in one shop or another.:facepalm: :thanks::bow: Wish List GM performance LS3 Heads Rhino Cam Package Apex Motorsports LED Taillights |
Sweet looking car - great name too..
|
Quote:
|
One of the first mods was a Hennessy CAI and MSD wires. Sorry no photo's. Eventaully sold the Hennessy:mad0260: and replace it with a Vararam.:thumbsup:
|
Panited Engine Cover
1 Attachment(s)
Not big on cosmetic mods. Like stuff that you can't see. Go fast stuff! Engine cover painted by my good Bud Ken at Stradle Craft.:thumbsup:
|
Pumpkin get's a Vararam.
2 Attachment(s)
The first real performance mod, since the Hennessy CAI was a bust.:mad0260:Replaced it with a Vararam CAI.:thumbsup:
|
BMR Sway Bar
10 Attachment(s)
BMR Strut Tower brace installation with help from my buddy Derrek. Paint by Ken at Stradle Craft.:thumbsup:
|
ARH Exhaust & BMR Drive Shaft Loop, Tunnel Brace & Sub Frame Connectors
14 Attachment(s)
Kind of rolled 2 build sessions into one. Thanks for the help from Bill, Jeremey and James. Sometimes too many cooks spoil the broth..............but it was mint by the end..:facepalm::sm0:
:thumbsup: |
MGW Shifter
6 Attachment(s)
OOOP's The shifter was installed before the ARH exhaust.:facepalm: Thank's for the help from Bill, as well use of his shop and hoist. Sorry about the fussy pic's.:mad0260:
:thumbsup: |
Pumpkin Get's Thump
11 Attachment(s)
A little thump for Pumpkin. Alpine 500 watt mono amp and Pioneer 10" sub. Installation by my bud Tom at ESS.:thumbsup:
|
All times are GMT -5. The time now is 09:20 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.