Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   Need a clutch... (http://www.camaro5.com/forums/showthread.php?t=50347)

boostedyards86 11-02-2009 01:15 PM

Need a clutch...
 
Any one have any suggestions? I've tried getting ahold of ECS about the fidanza stuff but they haven't answered their phones or pm's all day. So any other options out there for us people.

DarricSS 11-02-2009 03:37 PM

Here is the Lingenfelter.

http://www.lingenfelter.com/mm5/merc...egory_Code=C62

And might have more luck ordering through Summit for the Fidanza.

http://www.summitracing.com/parts/FI...ry=Liter%7c6.2

lawdogg149 11-02-2009 03:41 PM

Map Performance best price out there $1179.99 deliveried. 7.6 ceramic with alum fly

Kris@BMCPerformance 11-02-2009 03:50 PM

Give us a call we have a few options! RAM would be my first choice but we also carry Fidanza, Centerforce and others. Check out our Selection HERE or give us a call 877-BMC-RWHP!

JM10 11-02-2009 05:21 PM

Quote:

Originally Posted by DarricSS (Post 1124425)

Does the lingelfelter kit includes the flywheel? :iono:


Lingenfelter is now offering our new ZR1 twin disc clutch assembly & flywheel that gives you exceptional holding power without sacrificing smooth operation and comfortable pedal operation. This system does not exhibit any rattle at idle or chatter during engagement and has been tested at over 700 horsepower.

Included in this system:
- Lingenfelter 6 bolt flange flywheel, OEM spec steel design made in the USA
- GM ZR1 twin disc pressure plate assembly, clutch discs & bolts
- GM ZR1 clutch slave cylinder or actuator assembly

For 2010 Camaro applications you will need the Lingenfelter slave/actuator spacer part number L360031410

The Lingenfelter steel flywheel is also sold separately part number L360010105.

markssylver 11-02-2009 06:15 PM

i went with the lpe zr1 clutch because it come s with a steel flywheel and the clutch itself is a gm part that can be picked up from any dealer

DarricSS 11-02-2009 08:07 PM

Quote:

Originally Posted by JM10 (Post 1125036)
Does the lingelfelter kit includes the flywheel? :iono:


Lingenfelter is now offering our new ZR1 twin disc clutch assembly & flywheel that gives you exceptional holding power without sacrificing smooth operation and comfortable pedal operation. This system does not exhibit any rattle at idle or chatter during engagement and has been tested at over 700 horsepower.

Included in this system:
- Lingenfelter 6 bolt flange flywheel, OEM spec steel design made in the USA
- GM ZR1 twin disc pressure plate assembly, clutch discs & bolts
- GM ZR1 clutch slave cylinder or actuator assembly

For 2010 Camaro applications you will need the Lingenfelter slave/actuator spacer part number L360031410

The Lingenfelter steel flywheel is also sold separately part number L360010105.

The only additional part you need is the Clutch Slave Actuator...it's listed at the bottom of the page on the first link:

"For 2010 Camaro applications you will need the Lingenfelter slave/actuator spacer part number L360031410"

http://www.lingenfelter.com/mm5/merc...egory_Code=C62

JM10 11-02-2009 11:47 PM

Can someone post the GM part number for the ZR1 clutch kit?

Thanks

JM

ZZcamaro 11-03-2009 09:14 AM

PM sent....
Fidanza is the best out there right now.... I will be using their system on my build this winter. I would not sell it if I did not trust it.

kelleyperformance 11-03-2009 09:24 AM

ZR1 FTW!! the clutch pedal feel and driveability of the ZR1 is FAR FAR FAR superior to the OEM camaro, corvette, and z06- as well as LESS pedal effort :)

SupremacyCustoms 11-03-2009 10:13 AM

SPEC is good to whats your price range.

JM10 11-12-2009 09:51 PM

Quote:

Originally Posted by JM10 (Post 1127078)
Can someone post the GM part number for the ZR1 clutch kit?

Thanks

JM

:bump:

Anyone?

BLKLIST 11-13-2009 08:20 AM

Katech's ZR1 twin disc with conversion aluminum flywheel is a good one:
http://store.katechengines.com/share...unt2=778388619

Fidanza's twin discs have proven very well:
http://www.lethalperformance.com/tra...7693_7694_7707

oachalon 11-13-2009 03:44 PM

I figure the day i go supercharged i will need a new clutch, but i love the pedal feel on the camaro. Does the zr1 clutch cause pedal feel to change, or is it pretty close?


All times are GMT -5. The time now is 06:04 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.