3,000$ F1-x procharger
 

SOLD SOLD....


Used f1-x head unit of sale perfect working condition. 3,000$ firm.

Procharger Cog bracket with hardware, fits ls motors made to fit in 5th gen camaro. Will fit other cars. Comes with 81 tooth lower crank pulley and 44 tooth blower pulley. Two cog belts, belt guard and blower brace. 1,100$ Firm.

Also have 1500hp intercooler with custom 3.5" tubing and big red race valve.

Need gone ASAP. Make me an offer!

Price reduced!

Power gains? What's the retail on this?

Power gains are limited to your engine setup. This blower can produce up to 35lbs of boost on a big cubed LS engine. Not sure what HP the blower is rated to but it's way under rated it was designed to compete in the x275 class. On my 408 I was making around 1k on 20lbs with the blower having alot left in it. Retails for 9,500 and I upgraded the intercooler with custom IC tubing. Not the junk Procharger sends with there "kit". Have well over 10k in the set up.

Bump

Are you selling the complete setup minus injectors I assume?

Yes. I bought this as a tuner kit without injectors for 9k. So no injectors if you buy the entire kit.

Pictures

Pics

Pic

How many miles? Does this fit a l99? Brings intercooler? Little more info . What else is needed to have a full complete kit for installation

Little over 5k miles on this. For another 1500$ I would throw in prochargers 1500hp intercooler, custom tubing and big red race BOV.
Additional parts-
You would then need an ATI crank damper to mount the cog pulley to.
Injectors matched to what power level and fuel you are wanting to run.
Most likely a return style fuel system. Personally would check into a squash system.

When I bought this as a "kit" from procharger, it just came with blower, bracket,intercooler BOV.

Yes will fit l99.