Suweeeet.
 

Seeing how the stock interior lighting is horrible, I went with the Phaztek aqua dome/floor package. For around $200 for the lighting and installation, this is one of the best mods I've done yet! I had it installed to a switch so I can control the lighting yet wired to the ignition so when I turn the car off, the lights will go off in case I forget...... I think it really "lights" up the interior...no pun intended! :headbang:

go to autozone but 12 inch strips for like ten $ does same thing for under 30$ total not hard

Yea, I saw those at Auto Zone. I can barely change a light bulb so I wasn't about to tackle this! :lol: I did do my CAI by myself and was very proud. Me not very handy. :doh:

Man, I'm not either but this mod was a breeze. Got it all for free when I bought my side markers (some sort of sale, Black Friday maybe?) and setting everything up took like 30 minutes. I used a walkthrough on this site, otherwise I could not have done it on my own without knowing which wires.

Yours looks really good! Personally, I had to spray a couple layers of plasti dip over my dome light cover because the LED was so bright. Really tones it down a lot but still lets off enough light to see. Pretty perfect. Also matches the color of the ceiling when the dome light is off so you can't even tell there is a dome light cover. Just looks black all the way across, even in the day.

$200!!! :confused0068: I would have charged you less than $30 for the strips, and a pack of beer for the installation :lol:

Damn bro! Where were you? I would have bought you a case! :happy0180: the lights were only $40, but I paid $140 for the install. Pricey but I'm happy.

Dude I'm 20 new nothing about cars now I can install those in like 1 hour for free 140 is a rip off man.

Chill guys. Not everyone is mechanically inclined or has the ability/knowledge to do their own work.

It looks good. I've been looking at those myself. How closely does it match the factory blue?

One of you guys wanna come up from Texas to do some lighting installs on my car, I've got beer... :happy0180::sm0:

Haha :happy0180:

Is there a way to tap off the factory ones? I work at Pepboys and he strips Are super cheap but I don't wanna run wires everywhere. Can I just tap into the factory wire behind the light?

Ill but beer I have this next up on my list and not too good with wiring either. :)

Attachment 512221 here's mine

It's one of the easiest mods I've done, and I'm not that bright :lol:. All you need is this guide,a T-tap, electrical wire, and basic electrical knowledge.