BMR Launches New Product - 2010 Camaro 4-Point Strut Tower Brace (STB014)
 

BMR Fabrication

4-Point Strut Tower Brace for the 2010 Camaro

Minimize strut tower deflection in your 5th Gen Camaro with a 4-Point Strut Tower Brace from BMR Fabrication. Constructed from large diameter 1.75” x 0.120” tubing, this product maintains front end stability by canceling tower deflection. The BMR 4-Point Strut Tower Brace (STB014) mounts directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. Additionally, two forward links tie the towers to the fender/core support area to further reinforce the front end. Billet aluminum strut retainers replace the OE stamped steel parts for an improved look as well. Installation time is only 3 hours. Available in black hammertone or red powdercoat.


To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.


http://www.bmrfabrication.com/ForumI...014R_small.jpg

Nice..does this version clear the maggie?

Do you have any installed pics?

Were have one in the works to clear the Maggie which will hopefully be out in next month or two. Our shop car has a TVS2300 so getting a strut tower brace to fit it is a pretty high priorty at this point.

Here are some pictures of the two point strut tower brace installed, we had some computer issue not too long ago so i am going to have to dig up the pictures of the four point strut tower brace.

Please pm me a price shipped to 70546.

PM sent!

Here's one!

http://www.bmrfabrication.com/stb014.jpg

You can also view installation instructions for these HERE.

Just got mine on Monday, will install it tomorrow!!!!!

Post some pics when you are done!