Plastidip black out ???
 

Has anyone painted a black out on their Camaro? I heard plasti dip will not hurt the paint but its always better to ask first.. I want to black out the back of my car like the pic below.





http://i88.photobucket.com/albums/k1...nKDD6fQ_35.jpg

peels right off, no probs

Do it. Looks great. I love the stuff.

Sent from my Galaxy Note

That looks awesome. did it want to pull up when you removed the painters tape that masked the area?

It shouldn't. Just pull the tape before it totally cures and make sure you get at least 3 coats. I have dipped bowties and rims and I LOVE them!

https://sphotos-a.xx.fbcdn.net/hphot...69602399_n.jpg

I did it.
Be careful though, it's very easy to get the tape stuck to the plasti dip.

Done mine as well... just as stated make sure u pull the tape soon as you can get 3 good sprays on it... dont let it dry..... trust me :rolleyes:

Sent from my DROID BIONIC using Tapatalk 2

Thanks guys good info. I will be doing this after i buy a afterburner kit for my tail lights so I can do all of it at the same time.

How do yall get the lines strait on the rear I tried and I couldn't

Practice, I messed up the first time. But if you do light coats and do not get close to the tape then hit close to the edge with a heavy coat then remove the tape immediately your lines come out good. Do not let the Plasti dip dry it will mess up your lines. I actually went back and added a vinyl pin strip to the edge of mine.

http://i88.photobucket.com/albums/k1...psaf379a97.png

Did mine as well. Like everyone says do a heavy coat and then peel while it's wet. This will give you a clean masking line. http://img.tapatalk.com/d/13/06/28/junu5a7y.jpghttp://img.tapatalk.com/d/13/06/28/3ebyvynu.jpghttp://img.tapatalk.com/d/13/06/28/gupemugy.jpg