|
Black and IOM 2ssRS - Black Widow Avengers theme
10 Attachment(s)
Thought after a year and a half its about time I do a write up on what I have done so far.
I am a HUGE Marvel fan, so I thought it would be appropriate to theme one of the hottest cars towards one of the hottest characters of all time, Scarlett Johansson playing Natalie Romanoff, Blackwidow. I am trying to add subtle touches that enhance this theme. Input is always appreciated from those who are more creative than I. Just a note, this is going to be a show car more than a race car. I will be adding a few performance parts, easy bolt-on, but for the most part it will be cosmetic. I would like to thank Hotchkis Sport Suspension and A&A Auto Stores for providing me with a Stage 1 TVS. The car looks and handles much better. The 1" lower stance makes a big difference. Click here for my current project Overview: DOB 8/24/2009 #39,500 Black with IOM stripes 2SS RS Package Special Features: No back up sensors Chiclets Performance: Kooks 1 7/8" LT Headers BBK Cold Air intake SLP Powerflow Exhaust Hotchkis Stage 1 TVS Hotchkis 4-point Strut Brace Lighting: JDP Color Change Halo kit - #26 Black Widow LED emblem in trunk - #15 LED Foot-well Lighting AAC Kitt Light AAC LED dome and trunk light 5% Window Tint Tinted tail lights - #28 Tinted side markers Misc: 3D Carbon Side Vents 3D Carbon Side Skirts 3D Carbon Air Dam Vanity Plate - BLK WD0 Black Widow emblem on center console IOM Trim package IOM Steering wheel trim IOM Center Console IOM Gauge Trim GM Camaro floor mats Defenderworx Black Bow-ties GM IO engine cover Plasti-Dipped Wheels Engine cap dress up Audio: 2 - 12" Hifonics Subs 700w MTX TE604 for speakers ******** FARK MTX TA5601 for subs Boston Acoustic sound package ******** dual enclosure DB Link RCA Cables Knukonceptz power wire DB Link distribution and ground blocks Dynamat in doors and trunk On Order To be installed Hex Vents Wish List Hawk Ceramic break pads Painted calipers Havoc Diffuser Firebreather Spoiler Wheels To Do list Tint DRLs |
Build Progress:
Purchased 9/15/2010 in Bradford PA from Edmonds Chevrolet. http://carphotos.cardomain.com/ride_...4018_large.jpg http://carphotos.cardomain.com/ride_...4019_large.jpg http://carphotos.cardomain.com/ride_...4020_large.jpg It rained the whole ride home. Only have been caught in the rain twice since then. First Mod done was BBK Cold air intake http://carphotos.cardomain.com/ride_...4025_large.jpg Fall 2010 - Installed Orion 8001 and 2 12" Hifonics Subwoofers 400w RMS. I had a makeshift box from a past vehicle that I used for about a month. By mid October it was replaced with ********s dual enclosure. http://carphotos.cardomain.com/ride_...4070_large.jpg 10/19/10 - I was on my way home from Wal-Mart getting groceries, a half gallon of milk decided to explode in my trunk. The Orion amp had milk underneath it which it cooked and instantly began to stink. I removed the carpet and soaked up most of the milk then used a spray foam cleaner 3 times to remove the smell from the floor mat. The side carpet wasn't bad above the first few inches and was easily cleaned with papertowels and some carpet spray. The battery ended up sitting in about 1 inch. Good excuse to start dynamatting! http://carphotos.cardomain.com/image...1409_large.jpg Jan 2011 - Installed footwell lighting. I just bought 4 strips of LEDs from my local Autozone. http://carphotos.cardomain.com/ride_...4064_large.jpg Feb 2011 - I had the steering wheel and plastic on center console painted http://carphotos.cardomain.com/ride_...4088_large.jpg http://carphotos.cardomain.com/ride_...4146_large.jpg March 2011 - Blacked out side markers. I used 5% window tint on all 4 side markers. I followed this DIY for easy removal and install. Sorry for crappy cell phone pics. http://carphotos.cardomain.com/ride_...4040_large.jpg A guy at work made me a bunch of Black Widow hour glass emblems out of 16ga steel. They turned out pretty well. I used red and orange in several layers of a thin mist trying to get as close to an Inferno Orange as I could. http://carphotos.cardomain.com/ride_...4145_large.jpg April 2011 - Installed AAC's light bar - I dont have any pics of the install. I didnt run into to much trouble with this. I masked everything off twice around the mail slot to do my cutting. Even though I placed a towel and 2 layers of tape between the dremel and the plastic, I still managed to scuff up the one corner, but its hardly noticable. I ran the wiring to a switch where the controls for the HUD is located. It is also setup so that when I get AAC's dual halos I will be able to change the color from white to red with the switch. All i have to do is wire a relay between the power for red and white. http://carphotos.cardomain.com/ride_...4153_large.jpg I think that was all I did from April to July 2011. At the end of June I attended the Carlisle GM Nationals. Judging was Saturday afternoon and awards were scheduled for Sunday around noon. I rode over to the fair grounds early Sunday to see the posted results. CLASS WINNER!!! WOOOO WHOOO!!!! So I call my g/f who stayed at the hotel to sleep in and told her I would be right there to pick her up so we could get back to the show. Got to the hotel, and she HAD to have Sheetz coffee. Hotel coffee wasnt good enough and neither was Carlisle coffee. So we went to Sheetz. When pulling in I have about 5 miles to my left side. My right side....... well.... :yikes: hit the curb :facepalm:. I got a big scrape on my wheel. Pissed off, we went to the fair grounds. Thankfully no one noticed, or at least told me they noticed, and when it was time for the awards the photographer was on the left side. When I got home, I placed an order for 5 cans of plasti-dip and got to work. This was the damaged wheel - the other 3 look the same. I need to find the pictures of the damage. http://carphotos.cardomain.com/ride_...4143_large.jpg 8/4/11 - Added engine cap accents http://carphotos.cardomain.com/ride_...4151_large.jpg http://carphotos.cardomain.com/ride_...4149_large.jpg http://carphotos.cardomain.com/ride_...4150_large.jpg 1/22/12 - Painte CHEVROLET black on my IO engine cover http://carphotos3.cardomain.com/imag...1407_large.jpg 1/25/12 - Dynamat door panels - Pics only of Right door http://carphotos.cardomain.com/image...9450_large.jpg http://carphotos.cardomain.com/image...9449_large.jpg 3/15/12 - Added LED black widow emblem http://i906.photobucket.com/albums/a...DSC_0299-1.jpg |
Current Project
|
Stackpole Complex and Parking Garage photos on 6/29/12.
http://i906.photobucket.com/albums/a...Stackpole2.jpg http://i906.photobucket.com/albums/a...Stackpole1.jpg http://i906.photobucket.com/albums/a...an/Garage1.jpg http://i906.photobucket.com/albums/a...an/Garage2.jpg |
Just placed my order for IOM speedometer bezel from Lupe aka River City Creations. Looking forward to my interior matching!!
|
Great start, I really like all of the engine bay caps and plasti dipped wheels. Subscribed for future updates. :popcorn:
|
Quote:
|
Trunk Project
MTX TE604 MTX TA5601 - soon to be TE801D (pressure from dad wanting everythin EXACTLY the same) 2 12" Hifonics subwoofers Knukonceptz Power and Ground wiring DB Link RCA Cables DB Link Power Distribution block DB Link Ground Block Scosche speaker wire Raptor fuses ******** FARK http://i906.photobucket.com/albums/a...an/Wiring2.jpg Removal of stock amp - The speaker wires are for the old amp. No FARK http://i906.photobucket.com/albums/a...k-StockAmp.jpg Cluster of wires after removal of stock amp http://i906.photobucket.com/albums/a...AmpRemoved.jpg I had to chop a couple holes in the battery cover to be able to run the wires where I wanted them http://i906.photobucket.com/albums/a...n/DSC_0364.jpg http://i906.photobucket.com/albums/a...n/DSC_0367.jpg Wires coming up from the battery hole. Sorry no pics of the wiring under the lid. I am very very bad at in progress pics. I get on a role and forget the camera is even there! http://i906.photobucket.com/albums/a...n/DSC_0372.jpg http://i906.photobucket.com/albums/a...n/DSC_0373.jpg I reran some of the wires. After putting the amps in the trunk I realized that having all the wires coming out of 2 holes covering 3 1/2 space of amp, that my neat wiring attempt would not be possible. I ripped out the trunk cover, cut 5 more holes and redid the wiring http://i906.photobucket.com/albums/a...n/DSC_0295.jpg Sorry for the delay. Here is a picture of the trunk ALMOST done. I need to figure out a way to tie the power/ground wires to the box in a non-tacky way. Im going to talk to the machine shop at work and see if they can come up with something cool. http://i906.photobucket.com/albums/a...n/DSC_0296.jpg http://i906.photobucket.com/albums/a...n/DSC_0299.jpg http://i906.photobucket.com/albums/a.../DSC_02962.jpg |
1 Attachment(s)
Just got my speedo bezel from River City Creations. Looks awesome! Thanks Lupe!
|
This car is badass my friend! Can't wait to get started on modding mine!!
|
I really like the footlighting.. Can you give me some advice on how to install it?
|
Quote:
Here is the DIY. If I get a chance tonight, I will rewrite the writeup. If you have any other questions, PM me. |
Ok, heres a little more info.
I picked up 4 12" red LED strips from autozone. I tied 2 of them to the bottom of the back seat, and one in each foot well. The rear was the easiest. If you lift the seat, and if you have leather not sure about cloth, there is a piece of black mesh. I used 3 zipties on each strip. Then ran the wires up the drivers side. Make sure you put the end of the LED strip with the wires in the direction you want the wire to go. The fronts were a little trickier. I couldn't find a solid piece of plastic the length of the LED (you'll see when you start hanging upside down to find the grey wire). I just found 2-3 places and did the best I could. If you put it a few inches back you can't see the strip if it hangs a little. To run the wire from the passenger side, there is a small gap behind the underneath of the radio (if that makes sense) that you can pull the wire through. I soldered all the wires to 1 bigger wire which I T-tapped to the grey wire shown in the DIY. Now your footwells will turn on when you open the door or turn on your dome light. I am thinking about doing this under the door as well. Saw some pics somewhere and thought it looked really cool. |
Thanks for all the info man! I really aprec it!!
|
| All times are GMT -5. The time now is 02:38 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.