Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons (https://www.camaro5.com/forums/forumdisplay.php?f=11)

- - O2 Extensions (https://www.camaro5.com/forums/showthread.php?t=126913)

kaos_ss

01-31-2011 05:01 PM

O2 Extensions

Anybody have any recommendations where I can buy some O2 Extensions for the 2010 Camaro.

I installed some lt headers and need to extend the factory O2 connections.

Appreciate the help.

steeleshark2

01-31-2011 05:25 PM

Texas Speed

http://www.texas-speed.com/shop/item...d=854&catid=57

Eric Baker

01-31-2011 06:57 PM

Those are way long for the needs of this car (only need about 8-10 inches) and also the wrong plug. These cars have a 5 pin plug for the front O2 sensors.

bpoirier

01-31-2011 10:15 PM

I got mine from Ragin' Racin' just outside of Lafayette, LA. http://www.raginracin.com/ Give Shawn a call at 337-354-9970. He hooked me up, I had them at my door in two days.

steeleshark2

02-01-2011 03:42 AM

Quote:

Originally Posted by Eric Baker (Post 2789054)

Those are way long for the needs of this car (only need about 8-10 inches) and also the wrong plug. These cars have a 5 pin plug for the front O2 sensors.

Actually, I have a set of 24" and work no problems. I also dont think Texas Speed is gonna sell you the wrong kind knowing they work on these cars all the time. The picture is probably general and it is in there Camaro section.

bigsquirrel

02-01-2011 05:31 PM

http://www.casperselectronics.com/store2/

they have 6 and 12.

Eric Baker

02-01-2011 05:42 PM

Quote:

Originally Posted by steeleshark2 (Post 2790482)

Ok so they may just have a non-matching picture, but 24" is way more than needed, and you'd then have to figure a way to take up all that extra slack cleanly and away from a heat/abrasion source.

All times are GMT -5. The time now is 10:16 AM.