A sneak peak at our newly designed BMR rear lower control arms!
5 Attachment(s)
The is our newly designed BMR non-adjustable lower control that will replace our current version and will take over as part number TCA028. These non-adjustable lower control arms will work with the 2010 to current Camaros and can be used with the earlier style rear sway bars or the FE4 style rear sway bars. Our current BMR adjustable lower control arms (TCA029) will see the same changes and keep the TCA029 part number. We are thinking that this change in design for our TCA028 and TCA029 BMR lower control arms will become active within the next 3-4 weeks. If you guys have any question or inquiries let me know.
Now for the good stuff, here is some pictures of the new style lower control arm. |
Why the design change?
|
Quote:
|
Powder coat those black and send em my way and I'll test fit and give a review.
|
Are there big advantages in the extreme anti roll bar setup vs the new^^^^ 2012+ stock setup????
A little street, mostly drag racing |
The way its notched will this fit a 15 inch wheel?
|
Not for 2010 or 2011's? Or would I need new sways and end links?
|
So on lowered car the adjustable could get camber back to 0 or a hair positive for drag racing launches?
|
Quote:
Quote:
Quote:
Quote:
|
Blazzin you're a fountain of knowledge!! Lol
Appreciate ya!! Bmr and weld need to put ya on the payroll! |
Quote:
|
Quote:
Quote:
|
so thats why none of my bolts fit on my 15" conversion.. may i make the suggestion that you fit everything with it painted, so we dont have to die grind everything..
|
Quote:
All of our plates are CNC lasered so there shouldn't be any issues with bolt fitment. The only time we ever have had a bolt fitment issue with that kit is with the upper coil-over mount. Sometimes the welder will take it off the jig too soon and the sleeves that the bolts run through will tweak just a hair making it a little bit of a pain to get the bolt in. If you have any problems with any of our stuff all you have to do is give us a call and we would be more than happy to help you out. It is hard for us to fix an issue if we don't even know that a issue exist. |
All times are GMT -5. The time now is 02:08 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.