Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro V6 LFX Engine, Exhaust, and Bolt-Ons (https://www.camaro5.com/forums/forumdisplay.php?f=148)
-   -   New owner exhaust thoughts? (https://www.camaro5.com/forums/showthread.php?t=301452)

Asphalt 06-12-2013 06:48 AM

New owner exhaust thoughts?
 
Hey guys/gals,

Recently purchased a 2012 V6 3.6L Camaro and first thing I'm interested in modifying is my exhaust. I've done a fair amount of research and have nearly finalized my decision on the Flowmaster Scavenger Elite Shortys and the Flowmaster AMT cat-back exhaust. Just curious on others opinion. I want to stick with manufacturer match on headers/exhaust. Feel free to comment/suggest. :)

Cheveey57 06-12-2013 06:53 AM

In my opinion you can't go wrong with FlowMaster.
On a side note I hate center mounted tailpipes It's one thing I hate about the new Vette

Asphalt 06-12-2013 07:20 AM

That's pretty much what I was thinking. I've dealt with Flowmaster all of my life and have NEVER been let down. I've seen plenty of videos of people with the AMT system and I like the sound. However, what I don't understand is the vast majority do axle-back and no headers. Which IMO is pointless and denying not only yourself but more importantly your cars breathing ability. If its to be done, it should be done all the way.

Blu Ray 06-12-2013 07:25 AM

Quote:

Originally Posted by Asphalt (Post 6660325)
That's pretty much what I was thinking. I've dealt with Flowmaster all of my life and have NEVER been let down. I've seen plenty of videos of people with the AMT system and I like the sound. However, what I don't understand is the vast majority do axle-back and no headers. Which IMO is pointless and denying not only yourself but more importantly your cars breathing ability. If its to be done, it should be done all the way.

Nope........"NO Headers" for the LFX

Asphalt 06-12-2013 07:34 AM

Quote:

Originally Posted by Izach26 (Post 6660335)
Nope........"NO Headers" for the LFX

Reasons why you would say no headers?

nyrfan 06-12-2013 07:39 AM

Quote:

Originally Posted by Asphalt (Post 6660353)
Reasons why you would say no headers?

He is correct, you cannot do it becasue of the 1 piece exhaust manifold. Headers are not available for your engine (LFX).

GretchenGotGrowl 06-12-2013 07:43 AM

The exhaust manifold is integrated into the heads on the LFX motor.

Asphalt 06-12-2013 07:51 AM

So the people at Flowmaster are incorrect in saying the scavenger elite can be installed on the 2012?

nyrfan 06-12-2013 07:53 AM

Quote:

Originally Posted by Asphalt (Post 6660387)
So the people at Flowmaster are incorrect in saying the scavenger elite can be installed on the 2012?

100%

Quote:

Chevy Camaro 2010-2011, Scavenger Series Elite Shorty Headers by FlowmasterŽ. Replace your restrictive factory exhaust manifolds with these stainless steel headers and let your engine breath! These headers will increase exhaust flow for increased horsepower and torque. They’re ceramic coated for a long lasting premium appearance and come with everything required for installation.

Asphalt 06-12-2013 07:56 AM

This is disturbing news. I think I just lost a little faith. -.-
Not to mention I found an ABSOLUTE STEAL due to a incorrect pricing online for 432.99 :(

Blu Ray 06-12-2013 07:57 AM

The LFX, short of a Supercharger or Turbo.....a Tune (Trifecta), Intake (CAI or Volant) and Exhaust is where its at...

I did the MRT 2.0 Axel back

GretchenGotGrowl 06-12-2013 08:06 AM

Take a look around in this section.

http://www.camaro5.com/forums/forumdisplay.php?f=148

There's some good information to get you started.

Blu Ray 06-12-2013 08:09 AM

Quote:

Originally Posted by Asphalt (Post 6660394)
This is disturbing news. I think I just lost a little faith. -.-
Not to mention I found an ABSOLUTE STEAL due to a incorrect pricing online for 432.99 :(

I would still grab them and Re sell, someone here would grab it up in a heartbeat

nyrfan 06-12-2013 08:15 AM

Quote:

Originally Posted by Izach26 (Post 6660422)
I would still grab them and Re sell, someone here would grab it up in a heartbeat

Honestly OP I would not bother with that. A quick seach indicates these can be found in the mid to high $500 range. After PP fees, shipping and the hassle of selling you'll make $50-75 at best.


All times are GMT -5. The time now is 08:35 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.