Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment (https://www.camaro5.com/forums/forumdisplay.php?f=99)
-   -   RANGE TECHNOLOGY AFM V8 DISABLE DEVICE (https://www.camaro5.com/forums/showthread.php?t=368702)

RADREVX 07-15-2014 06:07 AM

RANGE TECHNOLOGY AFM V8 DISABLE DEVICE
 
The Range AFM Disable Device keeps your vehicle in 8 cylinder mode 100% of the time, preventing the Active Fuel Management system from dropping cylinders. This is the only product that will disable Active Fuel Management without reprogramming the factory ECU. Full power delivery all the time without factory warranty concerns.

  • Keep your vehicle in V8 mode! Disable 4 cylinder mode on all GM Active Fuel Management Vehicles.
  • Full Power - No more shuttering or dropping cylinders. Range V8 keeps you in full power 100% of the time.
  • Fast and easy setup - Simply plug in Range into your onboard OBD-II port and it instantly begins working with your Active Fuel Management to optimize your fuel economy.
  • Safe - The Range V8 does not reprogram your factory ECU. Leaves no trace.
  • Increased throttle response and more consistent power delivery across the entire power band.
  • Installs in seconds
Used for 2 months. getting a tune so no need for this anymore. works great.

$115 shipped

SOLD

RangeRoger 07-15-2014 09:57 AM

I'm using the AFM Disabler and loving it. Anyone else using one?

jose1003 07-15-2014 11:42 AM

how long did you have the range for and how did it work

RADREVX 07-15-2014 01:09 PM

2 MONTHS and it works awesome.

PepFontana 07-15-2014 02:58 PM

PM Sent

RADREVX 07-16-2014 05:58 AM

SOLD

RangeRoger 07-28-2014 09:12 AM

As a rep for Range Technology, I am always looking to hear back from end users. We value your feedback, so if you have any feedback for us, it's much appreciated.

ajp 07-28-2014 11:02 AM

Quote:

Originally Posted by RangeRoger (Post 7849228)
As a rep for Range Technology, I am always looking to hear back from end users. We value your feedback, so if you have any feedback for us, it's much appreciated.

Here you go:

http://www.camaro5.com/forums/showthread.php?t=370624


All times are GMT -5. The time now is 04:40 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.