For Sale ..... Savini SV-29s ..... 22"
 

$1500.00 For the whole throw em on and go set-up.

Edit: Only caveat is I can't ship them til March 19th Monday. :yikes:Approx 1k miles will be put on them in that time. I have to get to Jacksonville to get some paint work done. Price is still the same. IMO the wheels alone without the tires that are left and sensors are worth that.
(Of course I don't ask for payment until then either.)

Ok.

(I know it may be hard to resist for some of you but I do have to make an honest attempt to sell these. So no jokes please.) :rolleyes:

These wheels have a history known to most on these boards.

Initially they had vibration problems that took a while for Savini to get sorted out. Was a nightmare and I still think that Savini is a poorly run company when there is a problem.

BUT, they remade two of the vibrating wheels and so I now have them for sale here. Tires will 'flat spot' and create a small vibration for a few miles sometimes. Normal with 22 inch wheels.

To be absolutely clear and so the buyer can know exactly what he/she is buying I have made some precise video and taken pictures of the wheels for tire tread purposes.

Anyone interested can just ask for more pics or any questions you have I'll answer them.

In the below video I mention going to get the air leak fixed. All fixed now. Haven't had to add air in over a month which is when this video was taken. Right rear will need about 5 pounds when I get home to it must be leaking about a pound of air every 6 days or so right now. Nothing to worry about.

Paint chipping is the big problem at this point. These wheels can be stripped of paint or redone.

So the vibration problems were taken care of. The air leaks were taken care of. And now the paint is what it is. I've taken all of the hit on these wheels in getting them straightened out. So all it is is paint chipping.

I still get compliments often on them. After all, they are still 3 piece forged wheels that are beautiful. I just want more performance out of my wheels.

So here is a video. (I know your name is not Roberto but it was made for a potential buyer from Italy. Shipping was just too expensive)

http://www.youtube.com/watch?v=3df2N...6&feature=plcp

I'm only guessing but tires have about 5 to 10k worth left. 5 if you're gassing on it a lot. Rears are at 3mm and front are at 6mm.

Attachment 342449

Attachment 342450

Attachment 342451

Attachment 342452

Attachment 342453

Attachment 342454

Attachment 342455

Summary.

Savini SV-29s 22" wheels.

Rear wheels 22x10.5 - Front wheels 22x9
Rear tires are 315/25 - front tires are 265/35 All Pirelli PZero Nero
Chips and missing paint in areas.
Vibration problems were fixed by Savini.
Air leak problems fixed.

Rear tires have 3mm tread left fronts 6mm.

Those look great PQ. Good luck with the sale, sad to see them go. :(

:thumbup: Kudos to your honesty. Good luck with your sale!

PQ, while I'm SUPER happy that you're finally getting rid of these wheels. You need to say how much you're selling them for.

Agreed. Just got a PM. I forgot.

1500.00 is my price.

All jokes aside they are still perfectly good 3 piece Forged custom wheels.

Rims, Sensors, and tires as is. Paint is the only real problem with these.

Nice price. Good luck PQ.

Thanks.

I might not be the talk of the car shows anymore but someone will. :)

nice to see you finally parting ways with them. good luck on your sale.

All of that you went though and now selling them. =P

I bet your going with 18s next since your more performance minded now..lol

Great looking wheels...GLWS

Thank you. All bs aside, I will hate to lose the look. Earlier today I had a lady and her daughter get out of the car and ask if I could hang on a minute and they took a few pics of the car.

These wheels are freaking beautiful.

LOL, Not quite 18s but ya, need to get the car to move easier. LOL

Thank you.



Probably shouldn't have jumped the gun. But I have a few interested. So I'm pretty sure I'll be able to sell them. :)

Price shipped to 01108

Shipping will be from 36582

4 units of course. (Unless paletized with a freight company.)

29"x29"x14" average dimensions. 70 pounds per.

Best I found on the net so far is 70.00 per unit to Springfield for 280.00.:confused0068:

Ill get more quotes.