Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   Barton Shifter Side Slop?? (http://www.camaro5.com/forums/showthread.php?t=103322)

jay11 08-30-2010 07:16 PM

Barton Shifter Side Slop??
 
any one have a barton short throw with a lot of side slop...?? is it normal anything to be worried about? what causes it?

i know its not the shifter itself but the linkege coming out of the tranny

SS 376 08-30-2010 08:16 PM

My barton shifter sticks straight up like... it just sticks straight up. What's a lot of side slope? You got a picture?

Eric Baker 08-30-2010 08:29 PM

I think he means slop, not slope. It will be similar to factory since it uses stock linkage.

jay11 08-30-2010 08:38 PM

Quote:

Originally Posted by Eric Baker (Post 2278992)
I think he means slop, not slope. It will be similar to factory since it uses stock linkage.

yes i ment slop not slope my bad i was in a rush

thnks bud

LS3*LLY 08-30-2010 09:51 PM

Mine does the same thing and under hard acceleration it rattles and drives me crazy

jay11 08-30-2010 09:54 PM

Quote:

Originally Posted by LS3*LLY (Post 2279319)
Mine does the same thing and under hard acceleration it rattles and drives me crazy

mine has a rattle at WOT have you thought about bringing it into the dealer to have them look at the side slop?

JUISSD 08-30-2010 11:00 PM

Mine has slop but so did my stock shifter. It doesn't seem to affect anything at all. I have no problems banging through the gears.

pnyklr 08-31-2010 12:35 PM

Quote:

Originally Posted by jay11 (Post 2279331)
mine has a rattle at WOT have you thought about bringing it into the dealer to have them look at the side slop?

Doubt the dealer will do anything about it since it is an aftermarket shifter.

-Funk

clg_98ta 08-31-2010 01:01 PM

I would suggest playing with a couple of other cars and see if they all have what you describe as slop. There's supposed to be side to side movement, but the shifter should return to the same straight up position when you release it.

Did you have the same slop before installing the Barton? If so, you may want to replace the OEM shifter and have your dealer check it out.


All times are GMT -5. The time now is 09:52 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.