Removed Window Tint...Glue Wont Go Away?
 

I took my own tint off my car because it was too dark and I didn't want to worry about the cops. I got it off both windows (passenger and drivers) and got most of the glue off as well. The tint was all the down though beneath the window seal and now the glue is sticking making the window stick and wont even roll down. Any ideas how to get the glue off the window that is beneath the window seal?

Mineral spirits should do the trick

Ps Too late now but man your car will look way less cool , I got 5% on mine right now and love it

acetone on a rag

I heard u can use paint thinner on a rag. Not sure if it works. Was told to use it on my 3rd gen after i took tint off.

I agree I know it will but it is illegal here

And a razor blade helps just be careful

Soapy water and a razor blade apply heat

X2 on the razor blade, but you want to use some lubricant like goff off or soapy water.

Windex with ammonia and a razor blade with remove the glue.

how do I get on the bottom of the window that site behind the door seal at the bottom?

Probably have to take the door panels off to get to the glue....

I took off the tint on a 1995 Cobra Mustang I bought once and what a mess. I used blanket wash and a razor blade. Printers that use printing presses use blanket wash to remove ink from the round cylinders on printing presses. Thats where I got that idea.

Soapy water wont do squat....

yeah, take off the door panel. it's not hard. there's a DIY here somewhere. lol I've done it multiple times.

Soapy water isn't being used as a solvent it's being used as a lubricant. Heat gun or blow dryer soapy water and a razor blade is all you need I've never once had an issue with that combination. Glue peels off like butter and is a lot safer than a solvent.

:word:

and yes 5% rocks.