Brembo question
 

I'm looking at buying Brembo take-offs from the SS and own a 1LT. I don't know if these would just bolt right up or not. I know the rotor would slide right on, but does the caliper mount to the spindle on the LT the same as the SS.

Would I be looking at.....

Different lines?
New Spindles?
Any ABS issues?

This is new ground I know, but I'm confused...Help would be greatly appreciated. There are other members that are considering this swap as well.

Thanks :w00t:

X 2........! :popcorn:

It appears there are only 1 option for front knuckles. So they should bolt up. Brake lines will be different. rotors also may be differnet., as well has the hubs

mike
dms

Thanks for the input DMS. Would the brake line be different all the way to the master cylinder or just the line that runs right off of the caliper? I have a chance to get the full Brembo set-up (rotors, calipers and pads). I don't know much about the hub...I may be in over my head!

I went on one of the GM discount parts stores and found there are 2 different hubs. Not sure what the differences are. As far as the brake lines, it would just be the flexible ones that would be different.

mike
dms

I am also looking to upgrade my kid's 2LT to SS Brembo takeoffs. I know others have purchased the brakes for this upgrade, but has anyone actually completed the mod?? :iono: It would be nice to hear from someone who has done it.

A guy kinda hates to invest in the parts without knowing it will work!


__________________