Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro 1LE Forum (http://www.camaro5.com/forums/forumdisplay.php?f=149)
-   -   LT headers with npp? (http://www.camaro5.com/forums/showthread.php?t=314967)

Milk 1027 08-25-2013 02:53 PM

LT headers with npp?
 
anyone have good drive by videos of long tube headers with the stock npp exhaust?

right to travel 08-25-2013 03:48 PM

oh look at this a moderator with a 1le when did this happen? some one will post a vid here soon quite a few have lt w/npp

slim-n-none 08-25-2013 03:54 PM

Sub'd. And can yall post up what the setups consist of? Lt's, cats, anything else.... Im thinking christmas present to myself.

Milk 1027 08-25-2013 04:16 PM

Quote:

Originally Posted by right to travel (Post 6939598)
oh look at this a moderator with a 1le when did this happen? some one will post a vid here soon quite a few have lt w/npp

Started A Build Thread. :)
And I'm Not The Only Moderator With a1LE.

Sps 08-25-2013 10:47 PM

I will try to post video tomorrow (if I can figure out how too)
CAI, Stainless Works LT headers with high flow cats, NPP
Custom tune by FSP

OzzySS 08-26-2013 05:13 AM

lt headers with npp?
 
I don't have a drive by vid, but I've got a cold start on the build thread if that helps. Mods are pfadt tri-y and rotofab intake, no tune yet

Apex Motorsports 08-26-2013 06:57 AM

This is my buddy Larry's 1LE.

Stainless Works 1 7/8 with high flow cats, CAI, scoop/washer tank relocation, ported throttle body.

Mojave 08-26-2013 10:45 AM

Quote:

Originally Posted by Apex Chase (Post 6941436)

Link did not work

L99spec 08-26-2013 03:36 PM

Quote:

Originally Posted by Milk 1027 (Post 6939426)
anyone have good drive by videos of long tube headers with the stock npp exhaust?

Check this thread out or hit youtube up
http://www.camaro5.com/forums/showthread.php?t=311430

Milk 1027 08-28-2013 12:17 PM

Cool And All, But Theres Only One 1Le Video There And Id Like Toget Alldifferent Types Of Headers.

Jeff_SS 08-28-2013 12:20 PM

I don't have a drive by video of my Kooks headers and NPP, but I can tell you it sounds amazing...
If it means anything, here is my dyno video (sound isn't perfect I filmed from a distance with my phone...)
http://www.youtube.com/watch?v=ZNcp9dNCaog

And here is an idle clip
http://www.youtube.com/watch?v=W8OekHg12CU

JDP Sales 08-28-2013 12:31 PM

There will not be much deviation in sound with headers from brand to brand. Just about any 4-1 style header will sound similar. It's when you get into the 4-2-1 headers that the sound changes a little bit.

Best regards,

Tyler
888-308-6007

Mojave 08-28-2013 12:35 PM

Jeff - that idle. is that with the npp full open?

Jeff_SS 08-28-2013 12:38 PM

Quote:

Originally Posted by Mojave (Post 6955454)
Jeff - that idle. is that with the npp full open?

Yeah, I pulled the fuse.
But from the Factory, it's going to be open at idle. Closes from like 900rpm till you get to 3k rpm, then it opens again.
Since I pulled the fuse, it's open 100% of the time.


All times are GMT -5. The time now is 09:21 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.