Moving Sale! G6X3 Cam - LG Sways/Endlinks - Stock Driveshaft - Diffuser/Grille
 

Moving time so help me clear this stuff out!

LG 35MM Front & Rear Sway Bars w/EndLinks 15,000 mi - $300 local pickup
http://www.lgmotorsports.com/product...oducts_id=2288

M6 SS Driveshaft 18,000 mi - $50 local pickup
Stock

SS Upper Grille - $25 Local Pickup
Stock (compound marks so good project piece)

SS Rear Diffuser - $25 Local Pickup
Stock (compound marks and small nicks so good project piece)

You don't have the rods and springs for the cam?


Sent from my iPhone using Tapatalk -

I do not. The G6X3 is one of the cams that you would want to still put fresh springs in just so you know when your actual maintenance interval begins.

Once it came time to swap the springs as part of maintenance I decided to just swap to a custom grind in preparation for a blower. The rods were reused with the new cam.

I have my old LS3 just sitting on a stand. Don't know what to do with it. Was thinking of selling it or build it up and put it something.


Sent from my iPhone using Tapatalk -

Well let me know if you want to go with the cam. The supporting parts wouldn't be too bad and since you have it on a stand it would be a nice weekend project.

Will be placing cam and sways on national market Monday.

Interested in the diffuser, I'm down in Santa Clarita CA though. Where are you? Whipping an option?

Actually, you could get a new one from a dealer for less than the cost of mine and shipping. Should be around $85 new.

Would you do $225 shipped to 40356?

Good luck with the sale....

However those specs listed....are not correct for the G6X3.

Thanks for clarifying that Anthony! The cam speaks for itself so edited the incorrect specs out.

Cam sold~

Crazy sale this weekend only! After which I am moved and they can sit in the garage for a while until they sell~

Sways/Endlinks $225
Diffuser - Free
Grille - Free

Local pickup only! Located in Pleasanton.

Shipping for sways and endlinks to 91381?