After market rear control arms?
 

I have just come to find that the area where the stock tie rod ends on the pfadt rear sway bar attach has literally been torn away. the stock control arms are toast.

Anyone make after market control arms?

There are quite a few, BMR, Pfadt are just a few.

If you want to put a stock arm back on you can...there is a tab reinforcement out.

So, what your saying is your rear Pfadt Sway Bar End Links ripped their mounting tab loose on the rear lower control arm....right? Yes, it happens. It's a pretty common thing. There are a couple different companies that do make reinforcement tabs to "beef-up" that mounting tab. This is an inexpensive fix and will allow you to purchase and use OEM control arms. Or, like you mentioned, you can buy aftermarket rear lower control arms. As far as I know BMR and Spohn are the only companies that make them.....BMR being FAR more popular (and for good reason).

Thanks. Pfadt did not have any so bmr looks to be the winner

I just put in the new GM lower control arms as I had torn out both sides on mine.
The plate thickness on the original lower arms was .120", the newer ones are .180".
50% thicker, so GM knows the weakness.
Adding the Pfadt support plates will beef it up even more.

With the new control arms you can go with the ZL sway bar latter if you want, they accept both FE3 and FE4.
Lower control arm part no. 20942237 $57.69 CDN each at my dealership.

The factory arms are good, but they do leave a bit to be desired on the end link tabs. We do offer the Pfadt end link reinforcement tabs.
Part # 1410135
http://www.jdpmotorsports.com/media/...t_1410135a.jpg

We also offer new GM control arms as well as BMR with free shipping! Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007

Same thing happened to mine worh pfadt sport sways on my 2010. Go with the 2012 GM FE4 style LCAs, very worth it, with pfadt ZL spec sways, what a night and day differance

I've got the BMR Level III suspension and the Spohn LCA's. I haven't laid hands on the BMR's but the Spohn's are hefty and well constructed and they installed without issues. No complaints.

We build both non-adjustable and adjustable rear lower control arms for the Camaro depending on your needs. Also if you were on a tighter budget and wanted to go back with another factory lower control arm we have end link mounting braces which considerably strengthen that end link mounting plate.

BMR non-adjustable lower control arms (TCA028)
http://bmrsuspension.com/siteart/pro...A028_small.jpg

BMR adjustable lower control arms (TCA029)
http://bmrsuspension.com/siteart/pro...A029_small.jpg

BMR end link mounting braces for the factory control arms (ELK009)
http://bmrsuspension.com/siteart/pro...K009_small.jpg