Brembo brakes installed on my 2LT/RS >>>>
 

Today was a good work day we installed a complete Brembo Brake kit from a
2SS/RS and put them on my 2LT/RS.

First off special thanks to Fesler Built (www.feslerbuilt.com) for the OEM Brembo brakes off a 2010 Camaro SS I was able to pick up a complete kit from them (take off) rotors, pads, calipers, and brake lines).

We started this morning around 9:30-10am and we finished just after 12 noon. The front SS rotors and calipers bolt right up no modifications needed.

The rear SS rotors are a good 1-2" larger than the V6 rotors so you have two options replace the rear brake rotor shield with one from the SS cars or trim the existing one by 5/8" and the rotors will clear with no issues. The Brembo calipers mount up to all of the existing holes and the V8 brake lines or aftermarket ones are a must to reach.

I can tell what a difference in stopping power well worth the time in upgrading.

V6 owners with the RS package will have no issues with installing these.
Here you go lots of photos of the install.


Sean

Very Cool!!!! :cool::thumbup::thumbsup:

Part 2 the rest of the photos

Enjoy
Sean

I have been debating about doing this for a while now. Relieved to hear it's pretty much a bolt on job! Great pics. Now I just need RS wheels

What a relief to know it is a bolt on deal. We just received a set of SS brakes from Hennessey for my son's 2LT/RS so we are right behind you. I assume you bled the brakes. Is it OK to reuse the original mounting bolts? Overall not too much hassle? Thanks!


__________________

Awesome job guys! I have my SS brake set to I am going to install on my car soon. Looks like I will need the new SS brakelines then I am going to do it!

Yep fronts will be no problem you will just need to trim the rear rotor plate
5/8" so the rotor will fit with no issues. Other than that a piece of cake we took our time as we wanted to make sure everything fit.

Yep we bled the brakes and you can reuse the stock mounting bolts. We ended up using less than 1pt of ne brake fluid.

Yep the stock V6 ones are too short.

Glad I could help it's a great mod and you will enjoy the better stopping power :)

Sean

So where did you get the parts and what did it cost?

The Brembo brake package I got from Fesler Built (www.feslerbuilt.com) as for the price someone posted they are selling them for $500 for a complete set.

Great info. Thanks for posting. Will reference this when I sell my SS stock brakes to upgrade to either Brembo GT or CTS-V spec.

did you call them to buy a set?, because i don't see them posted on the website. probably not looking hard enough. :mad0260:

but good job on the install! glad to see it worked out well.

call them they have lots of takeoff parts available. Someone said they paid $500 for the set from them.

Sean

looks great!! good job!!:w00t:

I think we have 4 sets of these in stock ready to ship out. if someone needs them let me know as you can see its a very easy install and they work great. Thanks for the post