Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (https://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   Question for Pfadts (https://www.camaro5.com/forums/showthread.php?t=127149)

Cali_Camaro_SS 02-01-2011 09:40 PM

Question for Pfadts
 
1 Attachment(s)
So here is the alignment, I think everything looks ok but maybe the rear left toe needs a little adjustment. and is the front camber ok at 6.5 or do I need to readjust that?

CyberPredator 02-02-2011 10:29 AM

That's caster at 6.5, which is fine. if it were camber No it would not be fine

PfadtRacing 02-02-2011 11:38 AM

Overall, everything is certainly ok with those numbers. The toe up front is a little on the conservative side, but obviously nothing wrong with that. Caster is perfect at 6.5 left to right. The spread being 0 is optimal.

It would be optimal and ideal to have identical camber values in the right and left rear, but not mandatory to the point where the car will not function properly. Overall, I think you are set.

Cali_Camaro_SS 02-02-2011 09:38 PM

Cool, thanks a lot for the reply. I'll drive it for about a week or 2 and pull back in and recheck it and prolly set the rears better then but thank you again!!!

Buffnshine 02-11-2011 01:04 AM

[QUOTE=Cali_Camaro_SS;2797407]Cool, thanks a lot for the reply. I'll drive it for about a week or 2 and pull back in and recheck it and prolly set the rears better then but thank you again!!![/QUOT

who did your install and alignment?

Cali_Camaro_SS 02-11-2011 09:17 PM

I did. lol

Hess Motorsports 02-14-2011 10:28 PM

I would actually recommend running 0.010 toe in at the front and rear. 0.020 is a little too much toe in for these cars. It will work but I like to see a bit of toe out. Otherwise you may want to increase the caster spread to 0.3-0.5 on the right tohelp correct for road crown and a slight drift. Hit me up on PM if you have any questions. We align dozens of these all the time on our Snap-On laser system.


All times are GMT -5. The time now is 04:42 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.