Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   Pro chargers (https://www.camaro5.com/forums/showthread.php?t=294609)

Kodis16 05-10-2013 08:10 AM

Pro chargers
 
Lookin into prochargers... Just wondering what the best quality one is for the price thats given the best numbers? And where could i get it?

WheelmanSS 05-10-2013 08:35 AM

I would do a search. This question has been asked many many times.

You're best bet is to research the P1 vs D1.

Padre 05-10-2013 10:14 AM

If you want a Supercharger for show, get the P1.

If you want good performance and reasonable price in the 600-900rwhp range, go with the D1.

If you're insane (or an all-out race car) and price is no object, go with the F1 or better.

The new i1 (http://www.procharger.com/i-1supercharger.shtml) is very interesting.

Or you can do like I did, and do a D1 with a wastegate and boost controller, and you can do basically the same thing the i1 does. Though it will be interesting to see how the i1 does.

Padre

Detoxx03 05-10-2013 10:51 AM

Start with the D1 and enjoy that for a while. No point in the P1 and once you want/need more move to a F1.

akCamaross 05-10-2013 10:53 AM

Eastcoast super chargers.

BullF-16 05-10-2013 10:56 AM

If you can wait, i have a complete D1SC coming out end of summer if not sooner. Will come with 65# injectors and an LPE dual pump hat, secondary module, transfer tube and LPE FPCM.

this big motor is a little too much for the D1 so i am going twin turbos.

The D1SC will easily get you over 700rwhp at moderate boost levels.

Thinking about 4k for the entire setup

WheelmanSS 05-10-2013 10:59 AM

Quote:

Originally Posted by BullF-16 (Post 6527108)
If you can wait, i have a complete D1SC coming out end of summer if not sooner. Will come with 65# injectors and an LPE dual pump hat, secondary module, transfer tube and LPE FPCM.

this big motor is a little too much for the D1 so i am going twin turbos.

The D1SC will easily get you over 700rwhp at moderate boost levels.

Thinking about 4k for the entire setup


Damn! Where were you when I was shopping! :cry:


All times are GMT -5. The time now is 05:31 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.