Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   Expected 1/4 mile times? (https://www.camaro5.com/forums/showthread.php?t=137812)

Oxtar41 03-29-2011 07:43 PM

Expected 1/4 mile times?
 
I have a 2010 camaro ss with a E-force supercharger. On the dyno it laid down 528.93 hp and 501 ft/lbs at the wheels. Just curious what expected times would be im guessing maybe 11.5's? If it hooks up, its a LS3/M6. Also any ideas on a 0-60 time again if it hooks up. Just seeing what peoples opinions are, I have yet to be at the track in it since we have 400 feet of snow still in wisconsin.

BigMatt 03-29-2011 07:49 PM

depends on how good of a driver you are and your suspension/tire setup. Stock suspension i'd say about 11.8 with a bad 2.3 60ft

Oxtar41 03-29-2011 07:53 PM

Im a pretty confident driver and have no problems launching a car. The suspension is stock though

jrpxxii 03-29-2011 08:10 PM

Good luck with stock suspension. At your power level you will definitely need to do some upgrades in the rearend to get it to hook up. Bet you cant wait for the sunshine to arrive.

Oxtar41 03-29-2011 08:41 PM

yeah i need to save a bit more cash before i start the suspension stuff. I cant wait for summer this has been the longest winter of my life. there has been snow on the ground since thanksgiving...

mlee 03-29-2011 08:56 PM

Without tires and a M6 tranny you will b e lucky to get into the 11's... you'll need to be below a 1.90 60ft which is doable w/ a little practice. Your trap speed should be good...116 or so

mikepage0007 03-29-2011 10:20 PM

yeah, i agree with most posts, you will not hook and if you do...stock suspension will most likely wheelhop, that will break things at that hp..i had to run with traction control on with 22,s and best time was 12.1..i ran pretty hard but not full out, short shifted to keep wheelspin down and soft launch about 2800 rpm..full pedders track suspension..

Blkcamaro757 03-30-2011 06:28 AM

I saw a L99 with 550rwhp run 10'9 at the track. And I have a litttle more hp then what he did and I ran 12.9 with my ls3 m6. He had nittos and I had stock tires and it was cold out.

SilverIceman 03-30-2011 08:46 AM

Quote:

Originally Posted by Oxtar41 (Post 3027032)
I have a 2010 camaro ss with a E-force supercharger. On the dyno it laid down 528.93 hp and 501 ft/lbs at the wheels. Just curious what expected times would be im guessing maybe 11.5's? If it hooks up, its a LS3/M6. Also any ideas on a 0-60 time again if it hooks up. Just seeing what peoples opinions are, I have yet to be at the track in it since we have 400 feet of snow still in wisconsin.

Good Luck. Better launch that carefully with all that Hp. I've done all the suspension mods and it does help. Next up is a clutch that doesn't slip. First time I nailed the launch it (clutch) just let go. Car was too hot. My best time was 13.0, 2.1s 60', 110mph with stock tires. You're running about 60 hp more than me so you should be able to get down in the 12's, especially if you have any experience (which I didn't).

Hopefully I'll get some lessons this year, some DR's and lose a whole second. My goal is 11.9.

tony1 04-03-2011 11:37 AM

Should'a got the L99

CC Performance 04-03-2011 11:44 AM

Quote:

Originally Posted by Blkcamaro757 (Post 3028681)
I saw a L99 with 550rwhp run 10'9 at the track. And I have a litttle more hp then what he did and I ran 12.9 with my ls3 m6. He had nittos and I had stock tires and it was cold out.

launching an auto is a lot different than launching a stick car..I refuse to slip my clutch and cut 2.3-2.6 60 fts regularly...hahahahaha I catch people at the other end

Oxtar41 04-03-2011 02:25 PM

Quote:

Originally Posted by tony1 (Post 3048349)
Should'a got the L99

Thanks for the bright input.

CC Performance 04-03-2011 02:34 PM

you need to slip the clutch and take off at hi rpms..

2010 SS RS 04-03-2011 02:37 PM

screw all these pesimists. That edelbrock torque curve is nice. Get some Drag Radials and go have some fun. Stock PZeros are giong to be slick and dangerous at the track and will end up detonating an axel from wheel hop. Bottom line they suck. Suspension mods are nice but until you get the Drag radials and get to where you will benefit from them its almost a waste.

Go team edelbrock!


All times are GMT -5. The time now is 11:42 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.