Paint help on engine cover URGENT
Okay, so I used a clear adhesion promoter, forgot if I coated the whole engine cover :der:. I taped off the black areas, painted 4-6 coats of CRT. Removed the tape, it left a lot of sticky behind, used alcohol, paint thinner, then washed it.
Question 1, still might be a little tacky, anything else I can try? Or will the adhesion promoter seal it? Question 2, is it okay to re coat, including the fresh CRT paint, with the adhesion promoter before I clearcoat? And do I assume correctly that I need a 1000 grit sand between clears? Thanks a ton for your help. Jim |
All times are GMT -5. The time now is 03:20 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.