Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - Magnuson - TVS2300 Intercooled Supercharger System | Best Prices

Hi Everyone!

JDP Motorsports is excited to offer the Magnuson Supercharger for the 5th Gen Camaros! Magnuson supercharger system delivers near instantaneous boost and torque upon demand that really puts you back in your seat. This is a must have system for some serious power!

2010-12 SS Magnuson TVS2300 Heartbeat Supercharger (01-23-62-370-BL)

2013-15 Camaro SS Magnuson TVS2300 Heartbeat Supercharger (01-23-62-371-BL)

https://cdn.shopify.com/s/files/1/00...g?v=1541542684

Magnuson Heartbeat supercharger system for the 2010-2015 Camaro SS retains factory-like drivability, fuel economy, and reliability while providing significant peak horsepower and torque gains.

This kit includes the most advanced intercooler system available with integrated intercoolers derived from the same technology used in Formula 1 and NASCAR heat exchangers.

The Heartbeat kit was Magnuson's new "Heartbeat" cast aluminum intake manifold, factory 'push-lock' connectors are utilized in the fuel system for installation ease, Twin dual-pass charge-air-coolers use Formula-1 racing thermal-control technology, coolant circulation pump, heat exchanger and all necessary hardware to make a complete installation.

Power gains of approximately 125 horsepower!

Product Features:
- TVS2300 Heartbeat hybrid-roots supercharger
- Clears the factory strut bar and 2014+ SS hood insert
- Weights 17 pounds less than the standard TVS 2300
- TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
- Provides cooler discharge temperatures than comparable twin-screw systems
- Advanced high-flow inlet forward design
- Includes Twin dual-press charge-air-coolers utilize Formula-1 racing thermal-control technology
- Acoustically designed to minimize noise, vibration and harshness (NVH)
- Better air-handling characteristics than comparable superchargers
- 100% complete bolt-on system which can be installed in one day
- More power in a smaller package
- Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
- Delivers a proven increase in real world "under the curve" power
- High thermal efficiency
- 2.4 pressure ration capability
- High helix four-lobe rotors with 160 degrees of twist
- Redesigned inlet and outlet ports
- Utilizes 'push-lock' connectors
- Displacement on demand hardware retained for improved fuel economy
- Components have been independally tested to GM's specification
- Only requires an oil change every 60,000-120,000 miles
- CARB certified, 50 State legal ARB EO# D-488-34
- Standard 3-year/36,000 mile Warranty on the supercharger hardware
- Standard 1-year Limited Warranty on electronics
- Includes Free Shipping to the Lower 48!

Kit Includes:
- 6th Generation MP2300 TVS Heartbeat Supercharger with integral bypass valve
- Patented cast-aluminum high-velocity-port intake manifold
- Twin dual-pass charge-ait-coolers utilize Formula-1 racing thermal-control technology
- 8 high-flow fuel injectors
- GM LS9 fuel rail system
- Padded Box and UPS 2-Day shipping label for computer return
- Large front-mounted heat exchanger
- All necessary fittings, lines, belts and hardware required

MSRP: $7,995.00
Sales Price: $7,915.84

2010-15 LS3 Magnuson TVS2300 Intercooled Supercharger (01-23-60-171-BL)

2010-15 L99 Magnuson TVS2300 Intercooled Supercharger (01-23-60-173-BL)

https://cdn.shopify.com/s/files/1/00...g?v=1541542684

Magnuson intercooled supercharger for the 2010-2015 Camaro SS LS3 with a manual transmission retains factory-like drivability, fuel economy, and reliability while providing significant peak horsepower and torque gains.

This kit includes a large liquid-to-air intercooler inside the supercharger manifold to keep air temperatures down, a front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir. The integrated bypass valve used maximizes efficiency during cruising and allows your supercharged Camaro SS to maintain stock-like drivability and fuel economy.

The supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts during your install. All necessary hardware is included for a complete installation.

The Magnuson MP2300 TVS supercharger utilizes EATON's latest 6th Generation supercharger rotor technology for a highly efficient package that requires less power to drive, and delivers cooler discharge temperatures.

Power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels @ 6 psi!

Product Features:
- TVS2300 hybrid-roots supercharger
- Installs in one day (approx. 8-10 hours)
- 100% complete bolt-on system
- No hood modifications are required
- More power in a smaller package
- 180 degree rotation of the supercharger provides a straight airflow path for maximum power and efficiency
- Internal bypass valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
- Delivers a proven increase in real world "under the curve" power
- High thermal efficiency
- 2.4 pressure ratio capability
- High helix four-lobe rotors with 160 degree of twist
- Redesigned inlet and outlet ports
- Improved air-handling characteristics
- Acoustically designed for noise and vibration reductions
- Utilizes all factory "push-lock" connectors
- Only requires an oil change every 80,000-120,000 miles
- CARB EO# D-488-21 (2010-2013, 2014 Pending)
- Standard 3-year/36,000 mile Warranty on the supercharger hardware
- Standard 1-year Limited Warranty on electronics
- Includes Free Shipping to the Lower 48!

Kit Includes:
- 6th Generation MP2300 TVS Supercharger with integral bypass valve
- Patented cast-aluminum high-velocity-port intake manifold
- Liquid-to-Air Intercooler
- Extruded aluminum high flow fuel rails
- 8 high-flow fuel injectors
- Front and rear fuel crossovers
- SCT Handheld Programmer
- Large front-mounted heat exchanger
- All necessary fittings, lines, belts, and hardware required

MSRP: $6,695.00
Sales Price:$6,628.71

WE INSTALL PARTS!!

If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment.

Cheers,

Kayla L.
801-545-4215
Sales@jdpmotorsports.com