Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Page 4 of 7

Show 40 post(s) from this thread on one page

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Cosmetics and Lighting Modification Discussions (https://www.camaro5.com/forums/forumdisplay.php?f=37)

- - SS side badging (https://www.camaro5.com/forums/showthread.php?t=45751)

Partick

10-21-2009 04:43 PM

1 Attachment(s)

Here's mine.

anthonybyram

10-21-2009 10:17 PM

1 Attachment(s)

These I believe were 2007-2008 Impala SS badges, dont have the part number but these are alittle larger than the grille and and trunk lid emblems that are on the Camaro but match the font.

Miamivette

10-22-2009 08:34 PM

Quote:

Originally Posted by Capstone (Post 1003931)

Here's my "SS" Side Badging on my IOM. The black vinyl inserts really set it off with the black stripes

Glad to see yours. I was undecided about putting white ones or black ones on my IOM. The black does look great.

guydon

10-22-2009 10:12 PM

I think I will take the "camaro" off and put the SS badges low I will let you know when I get pics

spectrepig

02-28-2010 10:36 AM

I did like the one red one, took off the camaro (wanted to switch to black, but the black letters are cheap looking). Was going to leave it plain, but found the large SS emblems. I love the look. Even my wife who don't really care about a car's look complimented me on them. Dealers have them for around $30. I am having my vinyl guy redo the color on the inside so it is orange to match my interior.

camaroMSUfan

02-28-2010 12:42 PM

where can u find the flag emblems?

JEFF2010SSMANUAL

02-28-2010 03:07 PM

They look nice, but I wish I could find side "SS" emblems that have the same shape as the C A M A R O block letters.

Onereign

02-28-2010 05:32 PM

My emblems are in the mail right now. Question is, since I have 8 coats of Zaino on my car, should I do anything to the area I'm going to install them on before sticking em on? Like make a Dawn/Water solution and wash the sealant below the Camaro logo off first?

spectrepig

03-01-2010 09:31 PM

1 Attachment(s)

I removed the "camaro" and added the large SS badges. I had my vinyl guy inlay orange over the red the badges came with to match my interior. I had all the SS badges inlayed as well.

The Enforcer

03-01-2010 09:42 PM

How was it removing the "CAMARO."
Is it just glued on or drilled?????

spectrepig

03-01-2010 09:54 PM

Just stuck with double sided tape. You just need a hair dryer to heat up the tape, some fishing line, and some goo-gone. Oh and some patience.

ttexxan

03-01-2010 10:19 PM

Something just doesnt look right for some reason with the SS there

JEFF2010SSMANUAL

03-02-2010 08:54 AM

Quote:

Originally Posted by Onereign (Post 1532504)

Dishsoap strips wax. Wipe with rubbing alcohol, dry well, heat-up a little with hair-dryer to car and emblem.

I AM speaking from experience. I HAVE de-badged several cars, and have re-badged several cars with 3M double sided red tape purchased at AutoZone.

Onereign

03-02-2010 10:14 AM

So the rubbing alcohol will be sufficient for removing the Zaino/providing a better surface for the badge to adhere to?

All times are GMT -5. The time now is 09:25 PM.

Page 4 of 7

Show 40 post(s) from this thread on one page