Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)

- - Magnuson Jackshaft Bearing Replacement (https://www.camaro5.com/forums/showthread.php?t=335998)

jvoisel

01-06-2014 09:12 PM

Magnuson Jackshaft Bearing Replacement

Been having an issue with my blower and narrowed it down to jackshaft bearings. I have the jackshaft off of the car and removed the front bearing/hub with no problem but can't seem to get the rear hub/bearing off.

I've tried pressing it off like pictured below, but cannot seem to get it to move. Even tried to heat it up a little. Am I missing/doing something wrong?

http://i1120.photobucket.com/albums/...psaf9d9311.png

Thanks!!

pdiddy

01-06-2014 09:52 PM

Bump just to see what the fix is

jvoisel

01-07-2014 09:13 AM

After :frusty: for a while with a dake arbor press, I moved up to a hydraulic press and it came sliding out.

Ron_Robinson1

01-07-2014 09:41 AM

Quote:

Originally Posted by jvoisel (Post 7316658)

After :frusty: for a while with a dake arbor press, I moved up to a hydraulic press and it came sliding out.

Nice, now get it back together. Its been down for two long:popcorn:

All times are GMT -5. The time now is 06:41 AM.