DYI project ACS Composite T3 Ports
 

Purchased some T3 front bumper ports from ACS, decided to install them myself, here is the progress thus far:

Uncut, unpainted, unmounted:

http://i1081.photobucket.com/albums/...ardt2788/1.jpg

Stencil for first cuts:

http://i1081.photobucket.com/albums/...ardt2788/2.jpg

First port after using a dremel and sanding:

http://i1081.photobucket.com/albums/...ardt2788/3.jpg

Stencil on for circles:

http://i1081.photobucket.com/albums/...ardt2788/4.jpg

Circles cut:

http://i1081.photobucket.com/albums/...ardt2788/7.jpg

Lights test fitted:

http://i1081.photobucket.com/albums/...ardt2788/6.jpg

Painting matte black to match front lip, logos and grill:

http://i1081.photobucket.com/albums/...ardt2788/8.jpg

Mounting lights after paint:

http://i1081.photobucket.com/albums/...ardt2788/9.jpg

Side by side before and after:

http://i1081.photobucket.com/albums/...rdt2788/10.jpg
http://i1081.photobucket.com/albums/...rdt2788/11.jpg

Waiting for the honeycomb grill to mount in the open area, tomorrow will finish the 2nd port, then over the weekend will start cutting up the bumper.

Amazing job my friend. Keep going!