Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Chevy Camaro vs... (https://www.camaro5.com/forums/forumdisplay.php?f=51)
-   -   Mustang/Camaro HP difference (https://www.camaro5.com/forums/showthread.php?t=34727)

Black GT 07-29-2009 12:13 PM

Mustang/Camaro HP difference
 
My son is looking to get a SS Automatic, (He knows about the problems some are having) but it will be tuned along with other Mods added.
what we are trying to figure out is what kind of HP he will need to compete with my Mustang GT.

Before adding the supercharger I was running 13.0 with 292 RWHP, it seems like most SS automatics that are running right are putting down around 330 RWHP. assuming they will run the 13.0 advertised.

Now I'm at 490 RWHP with my Mustang GT, I would guess he would have to be around 550 RWHP to run near same times.

Sound about right?

Crowley 07-29-2009 12:41 PM

Quote:

Originally Posted by Black GT (Post 735026)
My son is looking to get a SS Automatic, (He knows about the problems some are having) but it will be tuned along with other Mods added.
what we are trying to figure out is what kind of HP he will need to compete with my Mustang GT.

Before adding the supercharger I was running 13.0 with 292 RWHP, it seems like most SS automatics that are running right are putting down around 330 RWHP. assuming they will run the 13.0 advertised.

Now I'm at 490 RWHP with my Mustang GT, I would guess he would have to be around 550 RWHP to run near same times.

Sound about right?

It is more than just numbers .. gotta look at tq curves, gearing, drag coeficient etc (drivers :) ) .... You are probably about right on though .. I would say about 530 - 540 rwhp with the same curves ...

I was guessing to run about he same as my 509rwhp / 520rwtq 04 cobra, I'd have to make about 550rwhp with the SS.

Crowley

Ninjak 07-29-2009 01:22 PM

Whoa ! your pushing that on the stock internals black ? or did you upgrade ?

But yes with the weight, tq curve, He will need about 530 or so @ the wheels. And of course the go fast suspension parts to plant that power. I think the L99's are more in 320 area for power though. There is a thread in the power/engine section with Dyno numbers.

Black GT 07-29-2009 01:36 PM

Quote:

Originally Posted by Ninjak (Post 735306)
Whoa ! your pushing that on the stock internals black ? or did you upgrade ?

.

Still stock internals, pushing 9.7 lbs. boost with the supershaker.

Plans right now are at the end of the year upgrade internals and turn the boost up.
looking for 600-650 RWHP.

Georgie 07-29-2009 01:42 PM

very impressive numbers without upgrading internals

Ninjak 07-29-2009 08:51 PM

Quote:

Originally Posted by Georgie (Post 735369)
very impressive numbers without upgrading internals

He's a braver man than me !

I'm nervous at 40 less HP than he is running. We both have the same S/C.

Black, I take it your running a GT500 fuel system then.

Black GT 07-29-2009 09:41 PM

Quote:

Originally Posted by Ninjak (Post 737170)
He's a braver man than me !

I'm nervous at 40 less HP than he is running. We both have the same S/C.

Black, I take it your running a GT500 fuel system then.

Mod list includes:
Saleen supercharger/supershaker
3.2 pulley (showing 9.7 lbs. boost)
V10 water pump pulley for better belt wrap
60 lb. injectors
GT500 duel fuel pumps
ROUSH tensioner
JBA long tubes/O/R H-pipe, JBA axlebacks
Powerhouse alum. driveshaft
BMR upper and lower control arms/ with relocation brackets
TCI 3000 torque converter
3:90 rear gears

Total cost including car: $40,000

Times I'm showing was with the 3.4 pulley showing 8.4 lbs. boost.
New times coming soon.

Ninjak 07-30-2009 10:04 AM

Quote:

Originally Posted by Black GT (Post 737348)
Mod list includes:
Saleen supercharger/supershaker
3.2 pulley (showing 9.7 lbs. boost)
V10 water pump pulley for better belt wrap
60 lb. injectors
GT500 duel fuel pumps
ROUSH tensioner
JBA long tubes/O/R H-pipe, JBA axlebacks
Powerhouse alum. driveshaft
BMR upper and lower control arms/ with relocation brackets
TCI 3000 torque converter
3:90 rear gears

Total cost including car: $40,000

Times I'm showing was with the 3.4 pulley showing 8.4 lbs. boost.
New times coming soon.

Nice mod list. I am still running 39lbs and I need to get off the BaP and go to GT500 pumps. I have LT's on the way.


All times are GMT -5. The time now is 04:59 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.