Oil breather install help
So I got a catchcan and breather for my v6 camaro and the directions were lacking on how/where the oil breather goes. Does anyone know how to install the breather on a stock engine with still stock air intake. Any pics would also help. Thanks
Sent from my DROID BIONIC using Tapatalk |
The breather replaces your oil fil cap.
|
Quote:
|
Is it a RX Products flow controlled checkvalved unit? If not you may need a tune to prevent a CEL due to the unmetered/un-restriced air entering w/out the MAF metering it. If you need help PM your email & I can email you the instructions that include what to cap off. :thumbsup:
|
Uh....I just replaced my oil cap with the breather when I bought it with my catch can. I have the stock intake. Was I supposed to do something too?
|
Yes. If using a breather you need to delete the fresh air line and cap the unused nipples or you will have your fuel trims going crazy from the unmetered air (log and watch them). :thumbsup:
|
Quote:
|
Anyone have a HowTo to do this properly? Please and thank you!
|
I think I also installed my rx breather wrong didn't know I need to cap the fresh air line
|
Checkvalved Breather NOTE: For the V8 If installing the optional breather you must cap off the nipple on the front inner side of the passenger valve cover and eliminate the hose to the airbridge and cap that end off as well to prevent unmetered air from entering the system. Make sure to apply some oil to the O-ring to aid in removal!! On the V6, The tube that runs from the CAI (or stock airbox) to the rear of the drivers side valve cover needs to be deleted and both fittings capped. |
:thumbsup:thanks had mine on wrong for months i alway wonder where the two caps went.
|
Does anyone have a pic of the stock intake after the breather install on the drivers side?
Sent from my DROID BIONIC using Tapatalk |
I too would like to see this. It would help.
|
http://www.camaro5.com/forums/showthread.php?t=183477. If you go to this thread there are some pics
|
All times are GMT -5. The time now is 07:52 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.