Auto Indexing Window Broken
 

I leave my windows open slightly because of the heat(approx. 1"). I came out, got in the car and my drivers window had closed itself. When I started the car, the info center told me to open and close my window. This went on for several days, and the indexing feature stopped working. :cry:. Not wanting to experience the joy of hoping my dealership could repair it without desimating my ride, I searched the threads and found one on a different problem, however the thread also explained how to reset the window module. With the key on roll the windowdown all the the way and hold the switch for 3 seconds, then roll up and hold switch for three seconds, repeat once more. I tried it and Tah Dah!!! Problem solved! If you have a similar problem try this. Thanx Camaro5 web site for saving me a trip to the dealer!!! :happyanim:

Glad that fixed your issue.

The steps to reset the windows is on page 1-16 of your owner's manual as well.

are these windows all power? (i mean is it one touch down and one touch up?

Yes. One touch up and one touch down. Push the button again in the same direction while the window is moving and it will stop where it's at.

They are also 2 position switches. Press lightly and the window will stop when you let off the switch, up or down. Press the switch all the way and they will express up or down. The sunroof switch is the same way.

thank u.. and it applies for both the windows right?

Yup:thumbsup:

This just happened to me. I came on this site did a search and found you and I did what you said (once) and "Voila" it worked. Thanks :thumbsup:

I love this feature, it always tripes my friends out!

THANKS!!!!
 

It just worked for me!!!!!!!!:wub:

Alright, I'm trying the manual method of reindexing the windows, but having problems.
It seems my driver side opens very little - about 1/8 inch or so, just barely clearing the molding, and the passenger side now opens about 3/4", a lot more than it used to.
I've tried following the procedure in the manual, opening the window all the way, then immediately closing it and holding up for 5 seconds after it's all the way up...
Tried with both half presses down and up, then full pressess on the switch down, then up. Tried with half press down, full pull up, and full press down and half press up.
Tried opening and closing the door before doing it. Tried it with key in ACC position, with key in full on position.

Is there some kind of trick to re-index the windows?

Try Pressing the switch all the way down. Once the window is down, continue holding switch for 2 seconds. Then roll window up, once up continue to hold switch 2 seconds. If this doesn't work, a trip to dealer may be necc.

If you just push it part the way down it will only move until you release the button, from what I have heard when you reindex your window do not use the one touch feature, it won't work that way.. upi should be able to feel a detent in the switch where you go from manual to the one touch feature.

At last I thought I was the only one that had this issue. The dealer didint know how to fix it. Thanks everyone !!!!!!