|
[COTW 6/13/11]: My yellow 2010 2SS
Hello everyone I have been meaning to do this for a while, but have been busy doing stuff with the car club, working on the car and going to Car Shows. As of right now I have a couple weeks off before the next car show so I felt that I could at least get this all started... I have a 2010 2SS M6 Rally Yellow Camaro... I have had it for a little over a year now and it has gone through some slight modifications.
***EDIT- Updated Mod List - As of November 16 2012*** Performance Mods: Pfadt lowering springs MTI Racing Six Shooter Shifter Kooks 1 7/8 headers + HF Cats (need to sell Headers only) HPS Twin Turbo In House kit (Completed by Dec 8th 2012) MTI Racing Stage 2 Cam MTI Racing Valvetrain (Springs, Locks, Retainers, seals, seats) 80 lb Injectors Corvette ZR1 Clutch MTI Spark Plug Wires Low Temp Thermostat Cosmetic Mods: Interior: CARID interior yellow carbon fiber accents JARHEAD BOB lighted trunk lid deck cover Footwell lighting (still need to wire up) Changed ABL lighting in doors to Yellow LED (Need to get a pic of this) Viper alarm system w/ auto start Llyod's Floormats Custom made fiberglass speaker boxes 2 10" Kicker Comp Subs Clarion Double Din Aftermarket radio Engine Bay: Roto Fab: -Engine Covers -Plenum Cover CF Painted -Radiator Cover CF Painted (May need to sell due to front mount turbos) -Fuse Box CF Pained Exterior Seibon CF Hood and Trunk lid (Custom stripes when done getting clear coated) Havoc 20" black chrome wheels (Need to sell) Enkei LS-5 20" gloss black rims (Need to sell) AAC Lighting: -Headlights and Fog light Halo's interchangeable between Amber and White -Side markers -afterburner led tail lights -interior light and trunk light -rear lighted bowtie (doubt I will put back on the CF Trunk, currently on stock trunk) -waiting on AAC Rear View Mirrors front bowtie blacked out 20% Tint all around(except windshield) Ordering ZL1 Front Bumper Pre-ordered ZL1 Replica wheels Future: Paint Brake Calipers Axels Break rotors and pads Suspension Upgrades (Most likely Pfadt) Intake Manifold Meth Injection Driveshaft Dual Fuel Pump Chassis Braces (2 Braces) Catch Can Pics to follow The Stock photo of my Car: http://i439.photobucket.com/albums/q...0_657115_n.jpg A couple more stock photo's: http://i439.photobucket.com/albums/q..._6944627_n.jpg http://i439.photobucket.com/albums/q..._4984049_n.jpg |
:popcorn:
|
Quote:
|
Updated
|
looks awesome! :coolpics:
|
Quote:
|
Just an odd question, but are you thinking of blacking out the roof as well.
Sick car. Love under the hood. Wow. |
Quote:
|
Sweet!!!!:headbang: I really like the rear view of the car with the lights. The engine compartment looks awesome too! We would love to have a good res. picture of the engine bay for our gallery.
|
Quote:
|
Looks really good with the CF...
Are you going to CF the roof? would complete the look! |
Quote:
|
Here are the photo's that I took for Roto-Fab...
http://i439.photobucket.com/albums/q...o/DSC_0099.jpg http://i439.photobucket.com/albums/q...o/DSC_0098.jpg http://i439.photobucket.com/albums/q...o/DSC_0097.jpg http://i439.photobucket.com/albums/q...DSC_0096-1.jpg http://i439.photobucket.com/albums/q...DSC_0095-1.jpg http://i439.photobucket.com/albums/q...DSC_0094-1.jpg |
Quote:
"Carbon Fiber Fabrics" http://www.uscomposites.com/carbonpage.html __________________________________________________ _________________________ |
So today was a productive day. I went to a local paint shop and got a quote for the paint job, although a little more than I was hoping for still a decent price. Gonna run me 2500 for the paint job. Went to the dealership to get replacement wiper blades of course they didnt have any there so I will have to go back tomorrow. Then my curiosity kicked in...
I have been wanting to get my twin turbo system for a while now just havent had the money for it. About 2 weeks ago I set a date for myself, will have twin turbo in by Oct. Well that is becoming more of a reality after today... Over the past week I have been talking to MTI Racing personnel in Marietta GA, and they gave me a quote for the system, install cost, and the tune... Was about what I expecting price wise, so I used that as a base line to go off of... Went to my bank and asked if it would be possible to get a loan for said amount and it was approved right away... So once I get my speakers done and paint job done, twin turbo is next. But I also need to get my headers too, still trying to figure out how to do this... by the time all is done I will have spent close to 20k this summer alone... once all is said and done it will be time to start paying off some of this debt... Good thing I got promoted and my pay kicks in next month... As for this weekend I plan on getting my footwell lights wired up and my Trunk Lid panel mounted and wired up. Pics will follow when that work is done... |
Thanks for taking the time to get the engine bay pics-they look great!:happyanim:
|
nice build. I have a CF hood as well and am still waiting on the Seibon ST trunk. I was debating on what to do with the engine bay, but really like the engine covers and CF accents! :coolpics:
|
Nice!
|
Headers
Just ordered Kooks 1 7/8" LT headers /w cats today from Maryland Speed cant wait to see how much of a beast its going to sound like with the Borla ATAK exhaust...
|
i am buying a carbon fiber trunk lid is it hard to install?
thanks |
Quote:
|
http://i439.photobucket.com/albums/q...o/DSC_0060.jpg
Just caught your tag...............Priceless :respekt: The AAC lights really look good! |
:)
That is one of my buddies tags that he used to have on one of his Talon's. But he kept the plate for obvious reasons... Its just hilarious... |
T3 front bumper and splitter shipped from Phastek today... Which means I should get it before I go to throw my car to be painted... Already have the SLP delete for the mail box slot, talked to a body shop and they said that they will make it look like its all one piece so it wont have the cracks from where the SLP delete is...
|
So I dropped off my car today to get the stereo put in... So I am without the Camaro for a week... Instead I am driving my beater... 93 Honda Del Sol...
|
nicely done...
|
Well so far they have the stereo in and they were almost done with one of the fiberglass boxes... Here is a pic of the stereo...
http://i439.photobucket.com/albums/q...DSC_0094-2.jpg |
Muy bonito carro felicidades con el.
|
CONGRATS ON COTW! Are those Lexani lx-15's all blacked out. If so, we have the same exact wheels. I love them. They look great on your car. They give the car such a nice stance. Love the hood painted black.
|
Quote:
|
Congrats on COTW! That's a Beautiful ride. I'm usually not too fond of Rally Yellow, yours however, is incredible.
|
Along with COTW, my T3 bumper and splitter arrived today. :D :D
http://i439.photobucket.com/albums/q...DSC_0002-1.jpg |
Congrats on COTW! Car looks awesome.
|
Quote:
Who did you purchase through? How long a wait? |
congrats on COTW. So are you planning on putting the CF trunk back on and then just ditching the illuminated bowtie?
|
GW
|
how did u get 3" borla atak i can only find 2.5
|
Quote:
|
congrats on winning cotw! i was wondering what width your rims are as well as the offset and tire sizes?
|
| All times are GMT -5. The time now is 05:27 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.