Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   5th Gen Camaro SS LS LT General Discussions (https://www.camaro5.com/forums/forumdisplay.php?f=2)
-   -   LLT Question??? (https://www.camaro5.com/forums/showthread.php?t=83213)

GVfanatic 05-13-2010 04:33 PM

LLT Question???
 
Hey guys. my name is Kris. I use to own a 92 Heritage Edition RS, but later went with a more practical choice for racing up in the mountains. So i bought a 2003 Mazda MX5. I owned it for 3 years and was about to throw a MP62 supercharger set on it so i could finally kill mustangs in the straight line. last december i hydroplaned in it and went up under a tractor trailor with it. needless to say the car was totalled. so i with all the time i've had without it i've been thinkin about what i will do with my next one. alot of guys i know do the LS1 and LS6 swaps into them which is scary as hell in a MX5, but fun. ANYWAYS (A.D.H.D.) I've been thinkin about doin a swap with the LLT block. its 200 extra hp and better mpg's than the 1.8 block in the Mazda. I just want to know if anyone has the deminsions of the block, and would also like to know if it sits on the same motor mounts as the LS motors do.

GVfanatic 05-14-2010 05:18 AM

BUMP....:help::popcorn:

Sir Nuke 05-14-2010 12:19 PM

Hi and welcome.....sorry I can't help with the question BUT, I too was a MAZDA nut for years.....I have been a mod on one if the biggest Mazda Forums.....you might want to check them out......you can find out anything there about Mazdas. Here a link to the site http://www.msprotege.com/forum/ I was into the P5 for years.

GVfanatic 05-14-2010 09:41 PM

hey thanks for the welcome. well my question is not really mazda related. i just need to know if the 2010 LLT 3.6 v6 fit on the same motor mounts as the 2010 SS Camaro LS3 block. if it does i can apply it to FlyinMiata's LSX kit for droppin LS blocks in miata's

GVfanatic 05-15-2010 10:58 AM

bump

RedJewelSS 05-15-2010 01:36 PM

Quote:

Originally Posted by GVfanatic (Post 1857422)
hey thanks for the welcome. well my question is not really mazda related. i just need to know if the 2010 LLT 3.6 v6 fit on the same motor mounts as the 2010 SS Camaro LS3 block. if it does i can apply it to FlyinMiata's LSX kit for droppin LS blocks in miata's

i will say that i highly doubt it. i have almost no experience with the specifics of a 5th gen. back in the day nothing was in common between the two except maybe the ac. if i were you i would use the ls1.

GVfanatic 05-16-2010 12:06 PM

ok. thanks. im still gonna do research on this as i really want to do the 3.6 swap

levi1922 05-16-2010 01:25 PM

Well idk about the mounts, but i will say that if you do end up getting the LLT, you will have a great motor in that miata of yours.

zen 05-16-2010 02:29 PM

You can go to GM's Powertrain site and at least get the photos and specs of the various engines.

http://archives.media.gm.com/us/powe...a/10car_us.htm

GVfanatic 05-17-2010 05:29 AM

Awesome! Thanks guys!


All times are GMT -5. The time now is 11:12 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.