The FNSS
The FNSS has undergone a few transformations since 2009.
Stock 359 RWHP 367 TQ First. Stainless Works 2" Headers w/CATS Flowmaster CB LG G6X3 cam Dual valve spring kit Comp 1 piece pushrods Barton shifter Electric cutouts Roto-Fab CAI ASP Underdrive pulley TR6 plugs Custom tune 463 RWHP 423 TQ |
So for step 2
I wanted more. So I had a local shop attempt to install a D1 procharger and Findeza twin disk Clutch. Well they pretty much hacked it in there. They couldn't tune the car and it was running out of fuel. So ADM Twin Fuel pump. My buddy and I install the ADM pump, and reinstall the Pro Charger. 641RWHP 560 TQ |
Step 3
Has mostly been keeping the car driving. I smoked the Fendeza clutch and went with ADM/LPE ZR1 clutch. Then After A few track runs Snapped the output shaft on a Stock Trans. Went with an RPM 6060. I then Gave the guys at DSS a call and went with their 9 inch setup with 3.70 gears with a tru track locker. I eventually broke the RPM trans (output shaft) and replaced it with an RPM 4l80. I also installed a ALKY Control Meth kit. Took the Car back out to CINCY SPEED for a new tune. https://www.facebook.com/photo.php?v...type=3&theater 765 RWHP 629 TQ 93 Pump gas with METH Ls3 stock bottom end RPM 4l80 DSS 9in 3.70s |
Stage 4
Now that we are mostly up to-date. I have pulled the ADM twin pumps (sold) and am installing Squash Twins E85 kit. Trick Flow 255cc 69cc combustion chamber 6 bolt heads. https://fbcdn-sphotos-e-a.akamaihd.n...13870890_n.jpg |
|
|
|
|
https://scontent-a.xx.fbcdn.net/hpho...85064885_n.jpg
Kirkey racing seat B&M Ratchet Shifter Extreme Innovations 6 point cage with swing out bars. |
https://scontent-b.xx.fbcdn.net/hpho...31779607_n.jpg
Extreme Innovations Cage Installed by River Bottom Racing. (The Farm Shop) |
https://scontent-a.xx.fbcdn.net/hpho...27005235_n.jpg
My RPM 4L80 hooked up to a DSS 9inch. Also installed by River Bottom Racing! |
|
River Bottom Racing where the rednecks are high tech.
|
Going to upgrade the rear suspension with.....
BMR Suspension - Drag Race Suspension Package DRP007 http://www.apex-speed.com/images/detailed/5/drp007.jpg |
All times are GMT -5. The time now is 10:50 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.