Change the Gauge Cluster Color???
Does anyone know how to change the guage cluster color? I am talking about the rings, my color is blue and li love the orange. I looked behind the guage pack and the rings are lit from a plastic mirror piece. The leds look like they can be programmed to change color......
Any help? |
well considering if you get the IOM interior package the gauges do what you want. SO you shoulod be able to get the factory pieces you need to make the change.
|
2 Attachment(s)
There has to be a way to change the color. Does anyone know a tech that pdi's the cars? It might be an option because it doesnt look like these leds are different colors.....
Anyone? |
I do not think you can do it that way, I have some flat LED's and you can not tell them apart by looking at them.
|
I'm thinking you may have to buy yourself some LED's and desolder them.
I was actually amazed at looking at the DIY forums for my current car on toyotanation. Someone did a desoldering job on their factory stereo and changed the green LED's to orange. I'll post the URL here as it may give you an idea. http://www.toyotanation.com/forum/t97347.html |
This is correct you have to unsolder the LED and solder on new blue ones. Although some areas are the color they are because of the color of the plastic in front of them. Once I get my Camaro I was planning on doing this mod.
|
congrats on the vin. Sept 10 is just around the corner!!!
|
Hi "rharon" If you want this is the part # 92242409 for a My orange gauge cluster like you asked, As for the cad thing i ordered the part we will see next week.
|
Quote:
|
They look like SMDs to me.
|
Quote:
|
Quote:
I have yet decided if I really want to attempt this or not... I really like the way it looks factory. Plus I may not be able to get the Radar detector I want in Blue, unless they release a blue one like they did of the current one I have... that just broke... It would look nice though all blue. |
@rharon or anyone else who has removed the circuit board.....
By any chance is there any manufacturer name or info on the board? It would be either (or both) silkscreened onto the board or printed in copper (looks shiny green) when the board was made. This info can be found on either side, usually near an edge. thanks! |
I did not notice when it was apart....if i remove it again i will check
|
any updates rharon?
|
sorry NO, I dont have my car its at the crusin for a cure car show in la than its goes to magnacharger for the dyno tune!
|
Good morning, Did you see a am planing to do the push start
|
I didn't see a thread . THAT WOULD BE COOL!!!
|
I did this in my 2006 GTO. Changed the LED's from green to blue. I did some of it, and Chris White did the rest of this for me. I don't know if he's doing Camaro stuff or not. You can find him here http://www.whiteautoandmedia.com/. If you are going to do this yourself, you need a controlled output solder station, tweezers, fine gauge solder, a magnafier helps too. Oh, and the solering skills necessary to do the job! You should be able to find the LED's from DigiKey or Mouser.
|
Fully converted the interior in my truck to blue LED's..DOnt think ill do it in the camaro, since I like the stock color now. From the picture posted above, looks doable
http://www.cardomain.com/ride/2532059 http://memimage.cardomain.com/ride_i...0057_large.jpg |
after changing the dome light and the foot well to match the blues are different colors. As I mentioned earlier I may not do it, but now I think I might, because I have been unable to find "ICE BLUE" LED's to place in the foot well or in the dome.
|
i want my rings to be red...hopefully we can get a fix asap
|
test
|
Has anyone done this? Are all the LEDs the same color? I know in the four pack they are blue and amber, so I'm wondering if this is the case with these gauges as well. I haven't been able to find any other threads where someone mentioned doing this mod other than this thread.
How difficult is it getting to the circuit board? Anyone got step by step photos? |
Has anyone learned anymore about the type of factory dash LEDs that GM is using? Do they have 2, 3 or 4 connections? Are they able to change colors with an added controller? Is anyone in the aftermarket biz looking at dash mods involving the LED colors? Thanks
|
http://www.camaro5.com/forums/showthread.php?t=162226
I did a DIY on changing the LEDs, but this only works if you're wanting to make a one time change. It's not something that you can use a controller and constantly switch colors, if that's what you're wanting. |
Get some then colored film place iver the current LEDs
|
All times are GMT -5. The time now is 12:22 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.