My Spin on Another Engine Bay Upgrade... (finished)
I started this upgrade awhile back and have been documenting most of it in my build thread, but I thought it was time to create its own thread since it has grown so big. (more detail in build thread)
I don't have a lot of time to spend devote to my Camaro at the moment, but I wanted to start this upgrade for a long time. I had to break it out in phases so that stuff would actually get done and I would have random parts sitting around the garage and me forgetting where they all went... Phase 1 - Take over garage and build a spray booth Phase 2 - Install heater hose relocation kit Phase 3 - Flip fuel rail, set aside to polish, and remove plenum cover Phase 4 - Paint plenum and fuse box covers Phase 5 - Remove coils and paint Phase 6 - Install valve covers with coil relocation kit installed Phase 7 - Finish wiring harness dress-up, install plenum cover Phase 8 - Finish fuel rail flip, install hose hiders, relocation evap solenoid I'm currently sitting right around 6, 7, and 8. About 50% of each step has been completed and hopefully, if everything goes right, the Camaro will be back up and running this weekend!! I'll be sure to post finished pictures. ____________________________________________ Parts!! http://s5.postimg.org/e60vj2pxz/9f5e...0aa803cb_7.jpg Phase 1: The lady in my life hated/hates that I stole her spot in the garage, but flowers and candy continues to take care of that :lol:. http://s5.postimg.org/vlj58kt07/Garage.jpg Phase 2 and 3: These installs were easy as pie. I like pie!! Before http://s5.postimg.org/wz66q52vr/Engine_Bay1.jpg After http://s5.postimg.org/u197wfv87/Engine_Bay2.jpg Phase 4 and 5: The plenum cover is a pain to paint. There was a lot of sanding to get the texture out, but everything came out better than I thought they would. http://s5.postimg.org/qk75tgw5z/Plenum3.jpg http://s5.postimg.org/xyj5zzutz/20130827_221358.jpg http://s5.postimg.org/4c36gc2jb/Coils2.jpg http://s5.postimg.org/da6d7qdhz/IMG_20130917_192157.jpg Phase 6, 7, 8: It is still a mess, everything is starting to come together!! http://s5.postimg.org/3zu9472s7/IMG_20130906_231935.jpg http://s5.postimg.org/4dvl3smvr/IMG_20130917_191819.jpg http://s5.postimg.org/az3pptdcn/20130917_210229.jpg |
Nice work! Looking forward to seeing the finished product!
Best regards, Tyler 888-308-6007 |
Quote:
|
Nice job. It's going to look pretty sharp when it's finished.
|
Quote:
Best regards, Tyler 888-308-6007 |
Finished everything tonight. Tomorrow I'll get everything cleaned up and get some better pictures. I have a few more parts to get, but it's pretty much finished.
http://s5.postimg.org/ua5yuoz4n/20130803_173558.jpg http://s5.postimg.org/l13skkq8n/20130803_173542.jpg http://s5.postimg.org/jbupciajb/20130921_220542.jpg |
:w00t: That looks good
|
Good job! Looks ALOT better!!:happy0180:
|
Wow that looks great. Where did you get your Valve covers?
|
too bad the valve covers did not show more, they look so awesome
|
That looks great. Congrats!
|
looks great man! Ill have to set some extra time to do this when i have my engine apart for the cam job. What kind of paint did you use?
|
Looks great. I'd like to do a few of those things myself.
|
I like that look a lot! good job. Love the paint booth.
|
All times are GMT -5. The time now is 04:35 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.