App radio2 & scosche install,now car wont start
 

I posted yesterday in the wrong section of the forum thinking i was having fuel pump issues so now i will try here.
Yesterday I installed my pioneer app radio 2 and scosche kit in my 2SS/RS. After i had everything all buttoned up i tried to start the car. The engine would turn over but not fire up so i scanned for codes (no codes thrown) reloaded my tune and even unplugged my battery fron both posts and left it for an hour,still no fire. I then reinstalled my BA stock head unit and the car fires right up.
Does anybody have any thpughts they can offer me?

Did you follow the directions to the letter. You have to dissconnect battery, do install connect wirring harness but not the touch panel. Hook battery back up, get in car with all electronics off, doors shut, windows and top up (if it is a vert), hood and trunk closed. While sitting in drivers seat take key out and wait five minutes after dome light goes out, and then hook up touch screen (both connectors), start up car. Hopefully you will not have the airbag warning light like mine does, and the car will start, if not you might want to call Scosche 800-363-4490.

Thanks Griffintile. I did follow the instructions to the letter, I even waited 15 min before plugging in the connectors, no fire. I am going to review my wiring one more time before I call Scosche again.