NEW ACS Composite T5 Splitter for Camaro V6 LS, LT, RS. New Product Sale !
 

http://cdn.shopify.com/s/files/1/102...g?v=1451185008

http://cdn.shopify.com/s/files/1/102...g?v=1451185008

Product Link, Pn 33-4-101

The ACS T5 Splitter is the latest product driven by enthusiast demand. The composite T5 Splitter will install on all Camaro LS, Lt, RS, V6 front fascias and WILL NOT lower the vehicle's ride height. Mounts’ using a series of supplied mechanical fasteners and does not require the front fascia to be removed.

Installation time is under 15 minutes.

The easiest splitter installation currently offered on the market. Given it won't alter the ride height, it is the most durable in addition to its complete belly pan to cover the under surface of the Camaro V6 fascia. Protect your OEM paint while improving airflow of the frontal area of your Camaro.

Part comes prepped and primed in with all the required hardware and instructions.

Estimated installation time: 15 minutes.

Product Link, Pn 33-4-101"]Check out from our store [/URL]

Nice, I read all around that a lot of V6 owners are lookig for equivalent of the T4 SS for the V6 Camaro's, T5 is the solution...

if i dont trade my v6 in ill deff order one of these!

I sure want to see it installed on an actual car.

We'll get a painted splitter installed this week. Definitely we'll post pictures...

Ordered with T5SPLITTER10! will post pics when I get it and install it

Thank You for the order Phillyfan1290,

I updated our original post so members will know which forum discounts are available.

Placed the order for the T5 for my 2012 45th 2LT RS. However, did not receive the discount...

Not sure what happened, but adjusted the order for you.

Thank you for the order :-)

Added a few pictures of the splitter installed. Took us less than 10 minutes :-).

Hopefully we get a decent day so we can drive out for a few better pictures.

http://images-cdn.ecwid.com/images/87523/63704731.jpg

Is that suppose to look like that?

I'll get a straight on shot of the wheel tomorrow. It is flush not sure what's the story with this shot.

That makes that front fascia look so much better IMO!!

Must have been a weird angle.... Splitter is flush to the wheel well line on both side :-)