Any Change in getting to reverse?
This is in regards to SS manuals out there. I am at about 500 mile mark and noticed yesterday that seems to be little harder to get it over to reverse, at first is was as smooth as butter and I just barely pushed it over and up and now I almost have to force it. A mechanic friend drove it yesterday and he said it was fine and not to worry. I was just curious if anyone else notcied anything similiar. And i'm talking flat ground at a dead stop type off situation. I did have a skip shift eliminator installed yesterday but I don't know how that could impact it in any way. I am going to dealer tomorrow anyway so i can mention to them, just wondering if anyone experienced anything similiar.
|
I'm about a lil over 400 and its still smooth as always, somewhere here a guy installed a skip shift to the wrong port and it locked out his reverse, he really had to force it in, or it wouldn't let him at all. let me see if i can find the thread.
Edit: http://www.camaro5.com/forums/showthread.php?t=32319 |
Hmmmm he said the one he used he reached for on top of the tranny which is how they describe it, I think that skip shift is disabled but will have to double check. Thanks for the link bbrock. I can definitely get in reverse its not gone its just stiffer to get there.
|
I've noticed that it takes slightly more effort to get from 3rd gear and above into reverse. But it might just be my imagination, or the issue linked to above.
|
All times are GMT -5. The time now is 07:36 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.