Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - SOLD Katech Red 14 SS 1LE, Recaro, 416 LS9, Truetrac, 4.10's, Built

----SOLD--------

Testing the waters on selling my personal vehicle, a 14SS RS 1LE in Red Hot. Car has the factory Recaro's and NPP exhaust. Highly modified car, very little mileage on the drivetrain.

Recent additions: Ridetech HQ Coilovers with custom rate Hyperco springs, DSS 1500 HP Axles, Improved Racing air/oil cooler, ZL1 Undertray, and a new LS9 Slave + Billet Slider. Alignment is dead-nut straight, the car absolutely rips around the track and drives very straight on the road. The toe is a bit aggressive and will dart around on crappy roads though.

New Engine/Diff/Wheels/Shocks have 5k Miles on them. Transmission shifts great, no grinding. The car made 540WHP/495WTRQ (615/560) with 12:1 CR on 93, with torque being flat over 450TRQ from 2500 RPM to 6200 RPM. The rotating assembly's bobweight is less than 1700g with 2" rod journals, with the right heads, valvetrain, and intake manifold the engine can be converted into a drag-spec build to spin safely to 8000 RPM. Chassis has close to 60,000 miles on it. Overall, the car is in good shape but isn't perfect (rock chips from mileage, etc.). The car is plummed for E85, I can wire it in and recalibrate the car to run on flex fuel before the sale. Track miles are 2 days at Grattan Raceway, and 1 day at Mid-Ohio.

Build thread: https://www.camaro5.com/forums/showthread.php?t=554344

Asking Price: $33,000 OBO. Open to all serious offers.
Price Drop 2/3: $31,000 OBO. Open to all serious offers.
Price Drop 2/10: $29,999 OBO. Open to all serious offers.

I have 100's of pictures of this build, here is just a few. I will be getting the car fully detailed before the sale with tons of pictures to show the car in its actual shape.

Extra parts that I can include:
Used set of RE-71R 305/30/19's
2nd LS9x Clutch, used

Here's the majority of the build, I may be missing a few things:

Engine:
Block:

LS9 Block
Mahle Flat Top Pistons, Gas Ported with Valve Pockets
Katech .927 Piston Pin
Callies Compstar Crankshaft, 4" Stroke, 2" Rod Jorunal
Callies Compstar Rods, 6.125" Length, 2" Rod Journal
Clevite Main Bearings
Clevite Rod Bearings
Katech Ported, Blueprinted LS3 Oil Pump
ATI 10% UD Damper
ARP Crank Bolt
Gates RPM Belt
Katech Billet Belt Tensioner
Katech 4" Stroke Piston Squirters
1LE Oil Cooler
Dewitts Upsized Radiator - TBD
Additional Oil Cooler - TBD
Oil Temperature Sensor
Improved Racing Oil Pan Baffle
Improved Racing Crank Scraper

Cylinder Heads:

Katech Ported LS9 Heads with Competition Valve Job
Fel-Pro 4.100 x .041 Head Gaskets
Katech Cast Valve Covers, Grey Metallic Powdercoat
Katech ARP LS9 Head Studs
ARP Valve Cover Bolts

Valvetrain:

LS9 Factory Ti/Mo Valves
CHE Bronze Trunion
Custom Road Race Grind Camshaft
3/8" Trend Pushrods
Blue Viton Valve Seals
Katech Spring Locators
PSI 1511ML Springs
OEM Spring Retainers
C5r Timing Chain
3 Bolt Cam Conversion
ARP Cam Bolts
CTS-VR Lifters

Induction and Exhaust:

PMAS Cold Air Intake with Gold Heat Insulation
Katech CNC Ported Throttlebody
Elite Engineering Catch Can Set
GPI Ported and Rod-Modded LS3 Intake with Gold Heat Insulation
Grams Performance 1-3/4" -> 1-7/8" Stepped Header to 3" Primary
Factory 2.5" NPP Catback

Ignition and Fueling:

LS9 Fuel Injectors
LS9 Spark Plugs
ZL1 Fuel Pump
OEM GM Flex Fuel Sensor
Front Structure Coil Relocation, with Motorsport Grade Wires
OEM Coil Packs
Fore Innovations Billet Fuel Rails
BMRS Fuel Line, 1 Feed per rail, Fore -10 to 2 -8AN Y Block. Plummed for Flexfuel, just need to wire sensor and calibrate.
Katech Spark Plug Insulators
Gold Heat Insulation around Fuel Lines

Drivetrain:

Katech LS9x Clutch
Billet Clutch Slider
Katech LS9x Flywheel
LS9 Slave Cylinder with Katech Sleeve
JDP Clutch Reservoir Seperator Kit
Hinson Clutch Speed Bleeder

Chassis:
Wheels:

19x11 HRE RC103, Custom Offsets, Dark Stone Clear Finish
Bridgestone RE71-R 305/30/19's Square
Custom 15mm front wheel spacers front, Black Anodize

Suspension

Ridetech HQ Front coilovers
Ridetech HQ Rear Coilovers
Hyperco 225/lb Front Spring
Hyperco 475/lb Rear Spring
Vorshlag Camber/Caster Plates
Z28 SKF Wheel Hubs
Z28 Upper Control Arm Mounts
OEM GM Truck Extended Studs (Front Only)
Detroit Speed Caster Offset Locks
Pedders Rear 32mm Solid Sway Bar
Hendrix Engineering Poly Offset Differential Bushings
Pegasus CNC Solid Cradle Bushings
Spohn Del-Sphere Rear Trailing Arm
Custom Inner Bushing for Del-Sphere Trailing Arms
JPSS Rear Lower Control Arm Camber Bolts

Brakes

C7 Z06 Front Brake Caliper, with 1LE Logo
Goodridge Stainless Steel Brake Lines
Motul RBF660 Brake Fluid
DBA 4000XS Front and Rear Rotor
Ferodo DS2500 Brake Pads

Differential

Eaton Truetrac
US Gear 4.10 Gearset, REM Isotropic Superfinished
DSS 1000hp Rear Axles

MISC/Body

Autometer Elite Series Oil Temp Sensor, reading from the block main galley
AEM Wideband from driver's side rear O2 bung
Autometer dual pod gauge, driver's side A pillar
MGW Race Spec Shifter
Z28 Front Splitter, Carbon Flash
Hood Vent in Carbon Flash
Chevy Performance Aero Kit Front Deflectors (Connects to Z28 Splitter) in Carbon Flash
OEM ZL1 Side Skirts
Z28 Spoiler, Carbon Flash
Euro Clear White Front Reflectors
Diode Dynamics LED Conversion for everything
Z28 Front Grill, Carbon Flash, Mated to factory RS Eyebrow
Improved Racing Air/Oil Cooler
ZL1 Undertray