Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (https://www.camaro5.com/forums/forumdisplay.php?f=76)

- - What driveshaft? ZL1 rear end conversion (https://www.camaro5.com/forums/showthread.php?t=296912)

Talks Cheap

05-21-2013 06:58 PM

What driveshaft? ZL1 rear end conversion

I just installed Zl1 rear end today. (complete cradle, brakes, diff, etc.) I need to know what drive shaft setup to use. I think the stock SS driveshaft is too long? I have read lots of B/S about this swad and just want to hear from someone that has done it.

GFORCE1320

05-21-2013 08:21 PM

We have done a few ZL1 shafts in our 3.5" aluminum slip style, give us a call if you have any questions.
Thanks
Chris

Talks Cheap

05-23-2013 08:59 PM

I guess you do need a ZL1 driveshaft and a trans adapter from ADM. I will say Adam from adm knows these cars in and out. I will definitely use these guys again.

octane

05-27-2013 08:06 PM

Where did you get the rear zl1, parts and price im interested in doing the same

Talks Cheap

05-28-2013 09:51 PM

I Bought the complete rear from Cleveland pick a part for $2750 and $350 for shipping and driveshaft from the same for $425 shipped. Transmission flange for $200 from ADM. I also purchased billet cradle bushings from ADM for $4-500 ? also front and read trans bolts for $4 a piece from Chevy. ADM guys Know these cars!

All times are GMT -5. The time now is 03:44 PM.