DIY side camera
Hi guys,
I am not sure if this particular setup has been done before. I tried to search but couldn't see this variance. Here is a quick write up on my camera setup. I only prototype one side for now. It works great for what i need for somewhat little money. I will add one more on the other side and the front. The camera view can be switch easily using a remote control switch. Goal: I would like a camera system to park in tight space and next to high front or side curve. It will also serve the purpose for blind spots while driving on the right side. Parts" I don't want something that too obstructing while not use. This will not draw much attention when it in the folded down state. As for the cameras, I want something small with metal casing. This will prevent damaging from gravel etc. 1 x 3.5" LCD folding screen - 28 dollars 2 x backup camera (left side and right side) 12 dollars each 1 x front facing camera 19 dollars each Parts pictures: http://farm9.staticflickr.com/8173/8...2fd76c9544.jpg http://farm9.staticflickr.com/8176/8...90ff1fc6a0.jpg I ran the camera cable above the wheel well cover across the hood and into through the firewall. There is a hole on the driver side so you don't need to drill (Thanks to the posts in this forum). Since i want this to be on all the time when i drive, tabbed into the lighter outlet. Here is the working pictures: http://farm9.staticflickr.com/8036/8...872be12075.jpg http://farm9.staticflickr.com/8311/8...0009d7d16c.jpg http://farm9.staticflickr.com/8314/8...c856544754.jpg http://farm9.staticflickr.com/8313/8...8fbc03ec3d.jpg |
Where did you buy this setup?
|
great job...
|
I bought everything from ebay.
|
The lighter outlet (12V outlet - whatever you want to call it) isn't on all the time. It turns on when the accessories are turned on. At least that how it was on my and 2010 and now with my 2011.
This is really cool though. Have any pics of how you set up the screen? Edit - should have waited for it to finish loading. Looks good :thumbsup: |
Quote:
|
off the subjet...but how do I start a new thread??? UGH!!!
|
Quote:
|
the only place i see that is in the vendor area...hmmm Ill go check some more thanks
|
very cool. this will start the DIY wheels for many.
|
:w00t:
|
Quote:
|
not worried about the camera getting damage by debris or water?
|
Quote:
|
All times are GMT -5. The time now is 01:25 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.